Hello,
I'm looking for an addon that plays the Hayabusa mission. I've been searching both the repository of Celestia, the forum as well as on the Internet, but have not found anything to play events and meetings of the mission with precision. I too have found no model of the Hayabusa probe, which I find strange.
Does anyone know if this addon and where you can download?.
Greetings
REQUEST: Hayabusa mission addon
Re: REQUEST: Hayabusa mission addon
Although there currently is no Addon for Celestia, it wouldn't be impossible for someone to create one. I don't have the time, though.
A sketchup model of the spacecraft is available at http://sketchup.google.com/3dwarehouse/ ... 71c69458b8
In principle, it could be exported to 3ds format for use in Celestia, but you'd have to get permission from its creator.
The spacecraft's trajectory is available from JPL's Horizons ephemeris server. Their format can be translated to Celestia's xyz trajectory format without too much difficulty.
A sketchup model of the spacecraft is available at http://sketchup.google.com/3dwarehouse/ ... 71c69458b8
In principle, it could be exported to 3ds format for use in Celestia, but you'd have to get permission from its creator.
The spacecraft's trajectory is available from JPL's Horizons ephemeris server. Their format can be translated to Celestia's xyz trajectory format without too much difficulty.
Selden
-
- Posts: 7
- Joined: 23.11.2016
- With us: 7 years 11 months
A search of the new Sketchup 3Dwarehouse yielded
https://3dwarehouse.sketchup.com/model.html?id=a76ecf04aaac13c88f86a571c69458b8
https://3dwarehouse.sketchup.com/model.html?id=a76ecf04aaac13c88f86a571c69458b8
Selden
- John Van Vliet
- Posts: 2944
- Joined: 28.08.2002
- With us: 22 years 2 months
from start to end
That is easier said then done
the simple part is it's current location on the surface of the asteroid
the next is orbiting the asteroid
the hardest one is launch to orbit to on the surface
xyzv files can be made from the spice data or as i do use the spice data
the earth and the asteroid and sun will need spice orbits
then adding the spacecraft to it
for reference see the spice orbit forum on CM
http://forum.celestialmatters.org/viewforum.php?f ... 702302a4dda518927d286c26d8f255
the cassini or New Horizons spacecraft would be good examples of putting it in orbit around the asteroid
( i have NOT done dawn at vesta or ceres )
but first learning to use the spice files is a bit like having a
" Pangalactic gargle blaster "
but gets better with time
That is easier said then done
the simple part is it's current location on the surface of the asteroid
the next is orbiting the asteroid
the hardest one is launch to orbit to on the surface
xyzv files can be made from the spice data or as i do use the spice data
the earth and the asteroid and sun will need spice orbits
then adding the spacecraft to it
for reference see the spice orbit forum on CM
http://forum.celestialmatters.org/viewforum.php?f ... 702302a4dda518927d286c26d8f255
the cassini or New Horizons spacecraft would be good examples of putting it in orbit around the asteroid
( i have NOT done dawn at vesta or ceres )
but first learning to use the spice files is a bit like having a
" Pangalactic gargle blaster "
but gets better with time
- FarGetaNik
- Posts: 484
- Joined: 05.06.2012
- With us: 12 years 5 months
- Location: Germany
John Van Vliet wrote:xyzv files can be made from the spice data or as i do use the spice data
Hm I think this is not very helpful. For starters, XYZ files are pretty straight forward, but it's hard to understand what a spice orbit is. I don't really get it myself. I can tell from my experience that I hate to deal with something I can't understand to a full extend soon by a simple research. Well doesn't the Horizons system do exactly that, converting a spice orbit into a xyz(v) file? If there is spice data avaliable, you could as well just use a xyz(v) file calculated from it, or did I understand something wrong? Only problem would be the Horizons system also isn't that easy to deal with.
Once you figure out the details, It's relatively easy to get xyz info from Horizons via email. (Or at least it used to be; I haven't done it for quite a while.)
Unfortunately, spacecraft mission managers don't always provide Horizons with up-to-date orbital information, and sometimes not at all. If you can get spice files from a mission's Web site it's more likely to be current and accurate. (but I haven't used Spice orbits for even longer.)
Unfortunately, spacecraft mission managers don't always provide Horizons with up-to-date orbital information, and sometimes not at all. If you can get spice files from a mission's Web site it's more likely to be current and accurate. (but I haven't used Spice orbits for even longer.)
Selden
- FarGetaNik
- Posts: 484
- Joined: 05.06.2012
- With us: 12 years 5 months
- Location: Germany
Yes, it's not that hard to learn for sure.
I've encountered some oddities, sometimes a specific spacecraft is avaliable, like Akatsuki, but the time period for orbital data changes. A while back I aquired orbital data from launch to shortly after the Venus flyby, that's where the data ended. Now there is data avaliable from the time in solar orbit to Venus orbit, but not anymore for the Venus flyby. Fortunately, I saved the trajectory back then, but stitching those 2 together results in a data gap of several month.selden wrote:Unfortunately, spacecraft mission managers don't always provide Horizons with up-to-date orbital information, and sometimes not at all.
- nardo
- Posts: 35
- Joined: 25.08.2016
- Age: 27
- With us: 8 years 2 months
- Location: New Haven, CT, USA
- Contact:
i forget how i got this. either spice or jaxa. or both. does it cover what you're missing?FarGetaNik wrote:a data gap of several month.
edit: the orbit centers chronologically are sol, ssb, and venus.
- Attachments
-
- akatsuki.7z
- (169.48 KiB) Downloaded 182 times
PC: Acer Aspire E 15, Intel Core i5-6200U 2.3GHz (2.8GHz with Turbo Boost), 16GB DDR4, NVIDIA GeForce 940MX with 2GB VRAM, Windows 10 Home
- FarGetaNik
- Posts: 484
- Joined: 05.06.2012
- With us: 12 years 5 months
- Location: Germany
Yes it does. It was roughly from dec 2010 to sep 2011. It should be the part "akatsuki.xyz". But the problem is when simply putting it into orbit around the sun, it is way off the ecliptic plane and shifted. What orbit frame do you use?nardo wrote:i forget how i got this. either spice or jaxa. or both. does it cover what you're missing?
- nardo
- Posts: 35
- Joined: 25.08.2016
- Age: 27
- With us: 8 years 2 months
- Location: New Haven, CT, USA
- Contact:
FarGetaNik wrote:it is way off the ecliptic plane and shifted.
hmm you're right. i wonder what happened. might be a mistake i made while changing the format in notepad++. i can't find the original but i did find this: https://darts.jaxa.jp/planet/project/akatsuki/akatsuki_trajectory_data.html.en
also, i'll start putting together a hayabusa add-on and see how it looks. this one might be pretty easy.
PC: Acer Aspire E 15, Intel Core i5-6200U 2.3GHz (2.8GHz with Turbo Boost), 16GB DDR4, NVIDIA GeForce 940MX with 2GB VRAM, Windows 10 Home