help docking with ISS

Post requests, images, descriptions and reports about work in progress here.
Topic author
davidbell
Posts: 2
Joined: 13.10.2006
With us: 18 years
Location: DUNKIRK, NY USA

help docking with ISS

Post #1by davidbell » 05.03.2007, 11:29

I am relatively new to celestia. I can not figure out certain items. Foe example docking with the international space station. Do I need special ad-ons? Also in the introduction it mentions flying the celestia space craft through the rings of saturn. What is needed? I am running the program on a Mac and am using version 1.4.1 Any suggestions for a beginner would be greatly appreciated

Thank you.

Peace,
Davidbell

Avatar
fsgregs
Posts: 1307
Joined: 07.10.2002
With us: 22 years
Location: Manassas, VA

Post #2by fsgregs » 06.03.2007, 01:11

Dear David:

There is an advanced add-on model of the ISS containing a detailed external docking port, which is used by the Space Shuttle. In Celestia, you can load that ISS model, go to it, locate the docking port, and using the steering keys on the numeric keyboard, and the keyboard speed controls, (the "A" key, "Z" key and "S" key), you can try your hand at docking with ISS. It is difficult, because it is moving. You have to come in at an overcompensated angle, then adjust as you close on the model.

To see a few screenshots and get the advanced add-on of the ISS, go to the Celestiamotherlode here:

http://www.celestiamotherlode.net/catalog/show_addon_details.php?addon_id=293

Follow the instructions for installing this add-on. It is a bit complicated, since the authors assume you have some initial knowledge of ssc files and so forth. If you are completely lost on how to install the ISS into your Celestia folder, post a new message here and I'll try to walk you through it.

With respect to flying through Saturn's rings, that's simple. Launch Celestia, then click this link: cel://Follow/Sol:Saturn/2003-08-13T18:24:36.33438?x=sAT/7pYn4oSyDA&y=Cl/BDLi96/n9/////////w&z=NW4Dd9b/aL9x/////////w&ow=-0.834022&ox=-0.259538&oy=-0.480674&oz=0.077460&select=Sol:Saturn&fov=34.659473&ts=1.000000&ltd=0&rf=40855&lm=0

You will be positioned outside of the rings, ready to start your engines and fly through them (aim for the Cassini Division gap). Use the throttle keys and steering keys. Make sure you press the [S] key to stop your ship when done.

Enjoy

Frank

bh
Posts: 1547
Joined: 17.12.2002
With us: 21 years 10 months
Location: Oxford, England

Post #3by bh » 06.03.2007, 08:29

The add-on homepage link at ml is wrong... sorry about that!

http://www.bobhundley.com/celestia/iss.html
regards...bh.

Avatar
Adirondack M
Posts: 528
Joined: 01.03.2004
With us: 20 years 8 months

Post #4by Adirondack » 06.03.2007, 11:49

bh wrote:The add-on homepage link at ml is wrong... sorry about that!

http://www.bobhundley.com/celestia/iss.html

I did fix this!
Bob, why don't you tell us at CML about such changes?

Adirondack
We all live under the same sky, but we do not have the same horizon. (K. Adenauer)
The horizon of some people is a circle with the radius zero - and they call it their point of view. (A. Einstein)

bh
Posts: 1547
Joined: 17.12.2002
With us: 21 years 10 months
Location: Oxford, England

Post #5by bh » 06.03.2007, 19:22

Adirondack... sorry... I've been a bit destracted latley and have let a few things slip.
regards...bh.

Topic author
davidbell
Posts: 2
Joined: 13.10.2006
With us: 18 years
Location: DUNKIRK, NY USA

Post #6by davidbell » 12.03.2007, 14:57

Thank you for your help. I thought that I had to download a space shuttle and then dock it to the space station. As I understand it , I just have to download the space station and use the regular commands to dock with the space station. Flying throught the rings of Saturn is great!

Thank you again for your help.

Peace,
David

Arnavion
Posts: 6
Joined: 24.03.2007
With us: 17 years 7 months

Post #7by Arnavion » 25.03.2007, 17:05

I have a problem also. At the page for downloading the files, I read a comment that I was to modify the ISS.SSC file in the extras folder to recognize the new model file's name. That file is not there ! What do I do if I don't want to rename the new model to ISS.3DS ?


Return to “Add-on development”