Hubble

Post requests, images, descriptions and reports about work in progress here.
Topic author
bh
Posts: 1547
Joined: 17.12.2002
With us: 21 years 10 months
Location: Oxford, England

Hubble

Post #1by bh » 29.01.2004, 09:13

Orions hubble model is available off my shuttle page. TERRIER has added some neat detailing:

Image

Check it out (it doesn't come with a shuttle!)

Regards...bh.

adamnieman
Posts: 42
Joined: 20.10.2003
With us: 21 years
Location: Bristol, United Kingdom

Post #2by adamnieman » 29.01.2004, 11:56

Lovely model. Big improvement. Thanks to everyone who contributed to making it available :D

Avatar
Jeam Tag M
Posts: 540
Joined: 01.04.2003
Age: 60
With us: 21 years 7 months
Location: Southern suburb, Paris, France

Post #3by Jeam Tag » 29.01.2004, 13:35

Nice, indeed, thank you Terrier for the release, and bh for the download.
I'll replace the HST by this adress in my catalogu

Had nobody been able to collect the data of the large model on which Orion_Nebula worked?
http://celestiaproject.net/forum/viewtopic.php?t=3471&start=0
(Obviously, since the site does not function any more, the bonds images either: - (
Jeam
Catalogue des ajouts /Catalog for the Add-Ons in French
...PAGES LOSTS, SORRY

Avatar
fsgregs
Posts: 1307
Joined: 07.10.2002
With us: 22 years 1 month
Location: Manassas, VA

Post #4by fsgregs » 07.02.2004, 18:29

Thanks guys for the updated Hubble. The lettering looks nice. However, would it be possible to add the texture to the solar panels? Orion's original model had only shiny silver flat panels with no grid or photovoltiac surface and this upgraded model shares that limitation. We have lots of solar panel grid textures available in other models, so it would not be difficult, I don't think, and would make the model that much more true-to-life.

Thanks and regards

Frank :)

Topic author
bh
Posts: 1547
Joined: 17.12.2002
With us: 21 years 10 months
Location: Oxford, England

Post #5by bh » 09.02.2004, 00:09

Frank...I've a modeling day on Wednesday this week...mainly for Atlantis/Mir but I will try to apply these textures to the hubble too.

Regards...bh.

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #6by TERRIER » 09.02.2004, 00:40

bh / Frank

I'm just in the process of looking at the model again, and I reckon I can give it a few more refinements.
For a start off, I've found a good version of the NASA font, which I can use to improve the logo.
I'll try and get some more detailing done as well, and maybe give it a texture or two.

Hopefully be done in a few days!

regards
TERRIER
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

JackHiggins
Posts: 1034
Joined: 16.12.2002
With us: 21 years 10 months
Location: People's Republic Of Cork, Ireland

Post #7by JackHiggins » 14.02.2004, 12:37

Hey TERRIER

Save yourself the work- don't forget the mesh NASA logo I made HERE :D That's what it's there for, after all!

It's based on THIS image, which is the largest NASA logo I could find anywhere online (1008 x 863)
- Jack Higgins
Jack's Celestia Add-ons
And visit my Celestia Gallery too!

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #8by TERRIER » 14.02.2004, 13:36

Jack

Don't worry, I aint forgot !

I'm not sure if the 'new' logo is on the HST ?

It just appears to have that slightly naff red text logo of NASA. Maybe it's where there's a dark splodge, just after the final 'A' ?
http://hubble.nasa.gov/art/shuttle_miss ... 5175_n.jpg

http://sm3a.gsfc.nasa.gov/art/updates/day5/slew_08.jpg

Luckily I've managed to find a version of the NASA font, which allows me to re-produce this very easily.

regards
TERRIER
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

OrbiterFan
Posts: 20
Joined: 05.06.2003
With us: 21 years 5 months

Post #9by OrbiterFan » 14.02.2004, 15:07

TERRIER, the "splodge" that's located after the last A in NASA on HST is the ESA logo. ESA made the first two pairs of the HST's Solar Arrays. If you want to improve the HST even more I can really recommend this NASA page: http://hubble.nasa.gov/technology/schematics.html
It's NASA's original blueprints of the HST. And trust me, they're really an good assist when modelling the HST. I have done it for ORBITER.

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #10by TERRIER » 14.02.2004, 15:38

Cheers for the info Orbiterfan, I've already got the pdf file with the 4 schematics of Hubble.

Originally, I wasn't intending to do too much to the model, but now I'm beginning to think differently....
....but I don't want to take too long completing it, and I still want to keep the file size to a reasonable level.

regards
TERRIER
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #11by TERRIER » 14.02.2004, 15:46

Jack

Do you have the ESA logo ? :lol:
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

JackHiggins
Posts: 1034
Joined: 16.12.2002
With us: 21 years 10 months
Location: People's Republic Of Cork, Ireland

Post #12by JackHiggins » 15.02.2004, 00:14

TERRIER wrote:Do you have the ESA logo ? :lol:

Why yes, yes I do! :D

You can rip it from the top of the Infrared Space Observatory (ISO) model, and although it isn't entirely accurate, it's about the same standard as the original NASA mesh logo I made. Funnily enough, I was thinking about doing a better one earlier today while looking at Ulysses, which also needs an improved version...

TERRIER wrote:I'm not sure if the 'new' logo is on the HST ?

It just appears to have that slightly naff red text logo of NASA.
Heh. The "wormlogo" - Dan Goldin's nemesis... :twisted:
DETAILS at http://www.nasawatch.com, where I can't find the page ATM..

I intend to make a mesh version of this logo too, when I get the time - it was used for everything between the ASTP and Hubble, so it's pretty important...

TERRIER wrote:Maybe it's where there's a dark splodge, just after the final 'A' ?

OrbiterFan wrote:TERRIER, the "splodge" that's located after the last A in NASA on HST is the ESA logo.


:lol:

*ESA promptly stops using Celestia on the big screen in Darmstadt*
- Jack Higgins

Jack's Celestia Add-ons

And visit my Celestia Gallery too!

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #13by TERRIER » 15.02.2004, 09:52

Apologies to ESA :lol:
I'd never have known it was their logo. Is there a better picture out there showing it ?

Jack
Cheers, I forgot about taking the logo off ISO.

The "wormlogo" aint that bad, it's just that the version on the HST, looks to have gone slightly wrong. I think someone had a bit of trouble with the "S"

regards
TERRIER
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

JackHiggins
Posts: 1034
Joined: 16.12.2002
With us: 21 years 10 months
Location: People's Republic Of Cork, Ireland

Post #14by JackHiggins » 15.02.2004, 14:34

The wormlogo on HST was just damaged by various bits of space debris- it's been up there for more than 10 years! The LDEF spacecraft, which orbited from 84-90, had 4,000 visible impact sites from debris, and about 16,000 smaller impacts, so Hubble is surely going to have something similar!

I can't find any good image of the ESA logo on hubble at the moment, but i'm sure you could just stick on the ISO one, and it'd look fine.
- Jack Higgins

Jack's Celestia Add-ons

And visit my Celestia Gallery too!

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #15by TERRIER » 15.02.2004, 18:53

JackHiggins wrote:The wormlogo on HST was just damaged by various bits of space debris

OK then, I'll let the sign writer off :lol:

JackHiggins wrote:I can't find any good image of the ESA logo on hubble at the moment, but i'm sure you could just stick on the ISO one, and it'd look fine.


Already done it Jack, and it looks pretty cool thanks. I just wanted to see an image, 'cos I wouldn't have known it was there!
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #16by TERRIER » 22.02.2004, 04:14

Nearly done !

I've just sent bh a copy, I hope it's been received ok :?:
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #17by TERRIER » 28.02.2004, 15:33

OK, here's a sneaky preview;
Image

and for those of you who wanted some more dynamic solar panels :wink: ;

Image

regards
TERRIER
Last edited by TERRIER on 06.03.2004, 12:22, edited 2 times in total.
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

ANDREA
Posts: 1543
Joined: 01.06.2002
With us: 22 years 5 months
Location: Rome, ITALY

Post #18by ANDREA » 29.02.2004, 10:31

TERRIER wrote:OK, here's a sneaky preview;regards TERRIER

Terrier, it's very very beautiful. :D
Will be available in a short time? :wink:
Thank you very much :D

Andrea :P
"Something is always better than nothing!"
HP Omen 15-DC1040nl- Intel® Core i7 9750H, 2.6/4.5 GHz- 1TB PCIe NVMe M.2 SSD+ 1TB SATA 6 SSD- 32GB SDRAM DDR4 2666 MHz- Nvidia GeForce GTX 1660 Ti 6 GB-WIN 11 PRO

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #19by TERRIER » 29.02.2004, 13:32

ANDREA wrote:Terrier, it's very very beautiful. :D
Yep, in celestia you can make things a lot nicer than in real life.
In reality if you get up close to Hubble, it really is quite ugly, especially the NASA logo :lol:
Also in future, I might carry out the cancelled SM-4 service mission, to improve it yet further. :wink:

ANDREA wrote:Will be available in a short time?


bh is still going to host the model, when he gets his computer problems sorted out, but in the meantime you can download it here;

http://terriercelestia.sphosting.com/INDEX.htm

direct link;
http://terriercelestia.sphosting.com/HST-21-2-04.zip

Please note that this model comes with a brand new .ssc file. So you will need to modify or delete your existing Hubble settings.

regards
TERRIER
Last edited by TERRIER on 03.03.2004, 23:57, edited 4 times in total.
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

Topic author
bh
Posts: 1547
Joined: 17.12.2002
With us: 21 years 10 months
Location: Oxford, England

Post #20by bh » 29.02.2004, 23:52

TERRIER...excellent model...computer is due to be fixed Tuesday! I live in fear!

Can't wait to get this one in orbit!

Regards...bh.


Return to “Add-on development”