Project "Celestia Origin", release dated April 30, 2021

[toutatis]

HAPPY BIRTHDAY!

[joneis]

Congratulations, I can't see the ort cloud, on another computer I could see it.

[Eric Nelson]

The visibility of the Oort Cloud depends on what magnitude you have Celestia set on.
If you click the ] it increases the magnitude and the [ decreases it.

[SevenSpheres]

I can't see the ort cloud, on another computer I could see it.

The Oort Cloud is invisible by default. To see it, you need to click on "Set Addon" and select "Oort Cloud". Also keep in mind that you need to be far from the Sun (more than a light-year) to see the Oort Cloud.

[Eric Nelson]

I know, and if you have it on, then you would see it unless the stellar magnitude you have set is too low.

[joneis]

The Oort Cloud is invisible by default. To see it, you need to click on "Set Addon" and select "Oort Cloud". Also keep in mind that you need to be far from the Sun (more than a light-year) to see the Oort Cloud.

I tried, 1k 2k and 64k, it doesn't work, my configuration is, AMD fx 8300, 16gb, SSD 240, gtx 980.

https://youtu.be/1cyrqsACQOQ 64k

https://youtu.be/xO8MIAM80qw 2k

Added after 13 minutes 7 seconds:

I know, and if you have it on, then you would see it unless the stellar magnitude you have set is too low.

yes, yes, It worked!!! thank you all.

what is it?

https://www.imagemhost.com.br/image/2NkFew

[SevenSpheres]

what is it?

https://www.imagemhost.com.br/image/2NkFew

The green squares are nebula labels. They're visible because the box in the third column next to "Nebulae" is checked.

[Lepestronik]

I had a small problem, in case anyone there has the same problem.

how to install on windows
versão celestia 1.6.1 x86 >>> c:\program files (x86)\celestia

versão celestia 1.6.2 x64>>> c:\program files\celestia

https://youtu.be/rn_vLeqBwhs

You have chosen a difficult method
You just had to pay attention to paragraph 1.3) of the instructions. Good luck!

[joneis]

You have chosen a difficult method
You just had to pay attention to paragraph 1.3) of the instructions. Good luck!

I tried, but my English is very bad, and I depend on a translator, I couldn't assimilate the content written there, but everything worked out, thanks.

[joneis]

how to change the color of the ocean? lighter blue for example. thanks.

https://ibb.co/hVHq72Z

[cubicApoc]

The ocean color can't be changed without editing the texture. That said, the oceans should already be a lighter blue with the atmosphere over them, do you have atmospheres turned off or can your system not render them?

[Art Blos]

Added XYZV-trajectory for the Mercury in the date range from 04.10.1957 to 28.11.2099.
Added 185 new locations. The total number is 539.

[Art Blos]

The release is postponed at least until the end of this year.

[joneis]

hi, i again, ^^, how do i fix this, thank you very much, again.
https://ibb.co/2qSTx7Y


asteroid comets orbits and names do not appear.

[Art Blos]

hi, i again, ^^, how do i fix this, thank you very much, again.

This is an imperfection of the Celestia. This effect also can be observed on other objects with atmospheres. I don't know if this is fixed in version 1.7.0.

[joneis]

help me please ^^, thanks SevenSpheres ^^

https://ibb.co/vXp4pS7

[SevenSpheres]

help me please ^^, thanks

You have to click on "ViDiBa" and check the boxes to make asteroids and comets visible. Apparently the "Objects" checkboxes for asteroids and comets in "View Options" don't work.

Also, I've merged your post into the Celestia Origin thread.

[Art Blos]

Added XYZV-trajectory for the Venus in the date range from 04.10.1957 to 22.01.2100.
Added 81 new locations. The total number is 1976.

[Art Blos]

Added XYZV-trajectory for the Earth in the date range from 04.10.1957 to 19.01.2100.

[gironde]

joneis wrote:
help me please ^^, thanks

'View options' does not work for asteroids, comets, and spacecrafts because the Celestia Origin version of renderbox.lua did not provide it. It is missing instructions in the module and also the object tables of each object. These tables should contain all of the asteroids, comets, and spacecrafts that you want to manage at that location.

in renderbox.lua, it is missing after line 12:

Code: Select all

-- This you select must be in section renderclass of config.lua
-- After must select the 'elseif bloc' that corresponding in section 'renderFrame.Customdraw' / renderclass
-- and the test 'if' in 'else' for standard traitement
   require "AllPlanets"
   require "AllDwarfPlanets"
   require "AllMoons"
   require "AllMinorMoons"
   require "AllAsteroidsRender"
   require "AllCometsRender"
   require "AllSpacecrafts"


these lua files are lua tables in the model of those used in Vidiba but include all objects of the type.

in renderbox.lua, it is missing after line 258:

Code: Select all

   elseif k == 13 then -- render asteroids
      renderCheckBox[k].Action = (function()
         return
            function()
               if renderCheckBox[k].Text == "v" then -- checked or not checked
                  renderCheckBox[k].Text = ""
               else
                  renderCheckBox[k].Text = "v"
               end
               for n,obj in ipairs(AllAsteroidsRender.objects) do  -- to replace by Asteroids table -- n is index and obj is the value
                  local ViDiBaObj = celestia:find(obj) -- recherche de l'objet dans Celestia
                  --ViDiBaObj:setvisible(not ViDiBaObj:visible()) -- inverse la visibilité
                  if renderCheckBox[k].Text == "" then -- test the class Asteroids and not the objects
                     ViDiBaObj:setvisible(false) -- set all objects of table
                  else
                     ViDiBaObj:setvisible(true) -- set all objects of table
                  end
               end
            end
      end) ()

   elseif k == 14 then -- render comets
      renderCheckBox[k].Action = (function()
         return
            function()
               if renderCheckBox[k].Text == "v" then -- checked or not checked
                  renderCheckBox[k].Text = ""
               else
                  renderCheckBox[k].Text = "v"
               end
               for n,obj in ipairs(AllCometsRender.objects) do -- to replace by Comets table
                  local ViDiBaObj = celestia:find(obj) -- recherche de l'objet dans Celestia
                  --ViDiBaObj:setvisible(not ViDiBaObj:visible()) -- inverse la visibilité
                  if renderCheckBox[k].Text == "" then -- test the class Comets and not the objects
                     ViDiBaObj:setvisible(false) -- set all objects of table
                  else
                     ViDiBaObj:setvisible(true) -- set all objects of table
                  end
               end
            end
      end) ()

   elseif k == 15 then -- render spacecrafts
      renderCheckBox[k].Action = (function()
         return
            function()
               if renderCheckBox[k].Text == "v" then -- checked or not checked
                  renderCheckBox[k].Text = ""
               else
                  renderCheckBox[k].Text = "v"
               end
               for n,obj in ipairs(AllSpacecrafts.objects) do -- to replace by Spacecrafts table
                  local ViDiBaObj = celestia:find(obj) -- recherche de l'objet dans Celestia
                  if renderCheckBox[k].Text == "" then -- test the class Spacecrafts and not the objects
                     ViDiBaObj:setvisible(false) -- set all objects of table
                  else
                     ViDiBaObj:setvisible(true) -- set all objects of table
                  end
               end
            end
      end) ()


In config the renderclass section must be :

Code: Select all

renderclass = -- not move the order -- table of class of objects
   {
      "",   -- 1 - Group Separation Mark
      "Constellations", -- 2 -
      "Galaxies", -- 3 -
      "Globulars", -- 4 -
      "Open Clusters", -- 5 -
      "Nebulae", -- 6 -
      "Stars", -- 7 Star-
      "Planets", -- 8 planets and others-
         "9",   --"Planet",
         "10", --"Dwarf Planets",
         "11", --"Moons",
         "12", --"Minor Moons",
         "13", --"Asteroids",
         "14", --"Comets",
         "15", --"Spacecrafts",
   }


I created an 'objects render' folder to put the object tables there and not to confuse them with those of Vidiba.

Remember that with asteroids, the screen quickly becomes full of names and orbits.

NB : In Celestia 1.6.1 and 1.6.2, the Planets type manages the display of planet, dwarfplanet, moon, minormoon, asreroid, comet and spacecraft. With the latest version of renderbox.lua, Croc and I wanted to overcome this state of affairs. Celestia 1.7 should fix this.