Spacecrafts for Celestia

The home for finished/released addons.
Locked
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #641by toutatis » 08.09.2018, 02:36

Toutatis, can you release your potentially hazardous asteroids and comets addon? Thanks.

Yes... here PHA add-on... the folder contains the data for 1520 potentially hazardous asteroids... there also asteroids which was discovered in this year... the orbits data for epoch 23 Mar 2018... but Comets add-on is not mine... but from Celestia Origin... also, several the most famous asteroids from PHA add-on uses textures and the models from Celestia Origin too, so PHA add-on will work properly with Celestia Origin only... or you can take some textures and the models from there... just several textures and the models... (not more than for 20 asteroids) ...

I also have plan to updating this add-on every 6 months... I guess that in next year this PHA add-on will contains all discovered potentially hazardous asteroids... at the date 7 Sep 2018 were discovered 1926 PHAs by information from MPC (Minor Planet Center)
Attachments
Potentially Hazardous Asteroids.7z
(3.91 MiB) Downloaded 249 times
Top
Avatar
SpaceFanatic64
Posts: 427
Joined: 16.08.2018
Age: 18
With us: 6 years 2 months
Location: Southern California

Post #642by SpaceFanatic64 » 08.09.2018, 04:04

Oh, ok. I already have Celestia Origin installed, by the way.
If you see that I made a dumb or nonsensical post years ago, please forgive me in advance.
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #643by toutatis » 08.09.2018, 12:27

still one model of Stardust is ready... the model with open capsula...
Attachments
Stardust-b(the model with open capsula).7z
(970.7 KiB) Downloaded 223 times
capture-20180908-175143.jpg
Top
Avatar
SpaceFanatic64
Posts: 427
Joined: 16.08.2018
Age: 18
With us: 6 years 2 months
Location: Southern California

Post #644by SpaceFanatic64 » 08.09.2018, 15:30

Awesome, toutatis! Nice work with the new model! However, though, I need the SSC code necessary for properly displaying the model in Celestia.
If you see that I made a dumb or nonsensical post years ago, please forgive me in advance.
Top
Avatar
gironde M
Posts: 845
Joined: 16.12.2016
Age: 72
With us: 7 years 10 months
Location: Montigny-Les-Metz, France

Post #645by gironde » 08.09.2018, 17:20

Bravo Toutatis,

there is only the capsule back on Earth :smile:


:clap: :clap: :clap: :clap:
Top
Avatar
SpaceFanatic64
Posts: 427
Joined: 16.08.2018
Age: 18
With us: 6 years 2 months
Location: Southern California

Post #646by SpaceFanatic64 » 08.09.2018, 23:09

Magellan: updated model from the NASA 3D Resource.
https://nasa3d.arc.nasa.gov/detail/jpl-vtad-magellan

If toutatis can successfully convert and place this model in Celestia, we should all be good. :smile:
If you see that I made a dumb or nonsensical post years ago, please forgive me in advance.
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #647by toutatis » 09.09.2018, 05:11

If toutatis can successfully convert and place this model in Celestia, we should all be good. :smile:

No problem... here Magellan add-on with new model with more realistic texture... (for Celestia by Toutatis)
Attachments
Magellan.7z
(1.47 MiB) Downloaded 320 times
capture-20180909-101931.jpg
capture-20180909-101715.jpg
Top
Avatar
jujuapapa
Banned
Posts: 344
Joined: 24.06.2018
With us: 6 years 4 months
Location: Western E.U.

Post #648by jujuapapa » 09.09.2018, 06:54

SpaceFanatic64 wrote:Magellan: updated model from the NASA 3D Resource.
https://nasa3d.arc.nasa.gov/detail/jpl-vtad-magellan

If toutatis can successfully convert and place this model in Celestia, we should all be good. :smile:

It exists on celestiamotherlode made by j Higgins !

See http://celestiamotherlode.net/catalog/show_addon_details.php?addon_id=330

And all is legal ! :wink:
Soft: Celestia 1.6.2
PC : Intel Core i9-9900K (4 GHz) , Chipset Z390 Exp, RAM 32 Go DDR4 3000 Mhz, SSD M.2 512 Go + HDD 3 To, MSI GeForce RTX 2080 8Go - W10 64b

I lost my old user, so with us: since more 12 years
=> It is by doubting everything that everybody approaches the truth !
Top
Avatar
Croc M
Forum Admin
Posts: 437
Joined: 10.08.2016
With us: 8 years 2 months
Location: Udomlya, Tver region, Russia

Post #649by Croc » 09.09.2018, 07:55

No problem... here Magellan add-on with new model with more realistic texture... (for Celestia by Toutatis)

:clap: :clap: :clap: :smile: :smile: :smile:

Magellan-2.jpg
Creator of the GUI "Lua Universal Tools"
25/V/1947 - 30/III/2019
Top
Avatar
SpaceFanatic64
Posts: 427
Joined: 16.08.2018
Age: 18
With us: 6 years 2 months
Location: Southern California

Post #650by SpaceFanatic64 » 09.09.2018, 14:18

Jujuapapa, yes I am aware of the addon that Jack Higgins made. All I wanted was for a version of the addon with textures

Added after 2 minutes 43 seconds:
Also, now all we need to complete our collection of spacecrafts for Celestia is the STEREO A and B spacecrafts.
If you see that I made a dumb or nonsensical post years ago, please forgive me in advance.
Top
Avatar
Gurren Lagann
Posts: 434
Joined: 31.01.2018
Age: 18
With us: 6 years 9 months
Location: State of Rio de Janeiro, Brazil

Post #651by Gurren Lagann » 09.09.2018, 15:03

SpaceFanatic64 wrote:Jujuapapa, yes I am aware of the addon that Jack Higgins made. All I wanted was for a version of the addon with textures

Added 09.09.2018, 14:21:
Also, now all we need to complete our collection of spacecrafts for Celestia is the STEREO A and B spacecrafts.

And I bet after what feels 5 seconds, toutatis or Gironde will make both crafts. Seriously! When I asked for the fictional Eris Explorer at July 29th 11:48, toutatis made its model a few hours later! I bet it was added but i didn't search far enough...

also I don't need to wait 3 hours to reach Eris woohoo
"The tomorrow we're trying to reach is not a tomorrow you had decided on!"
- Simon the Digger
"Nothing is impossible for me, as long I'm determinated to keep moving forward!"
"If other people aren't going to do it, I'm going to do it myself!"
- Me (Gurren)

Current major projects:
- Aur Cir
- Cel+
- Project Sisyphus
- Populating the Local Group
- An galaxy generator
Top
Avatar
SpaceFanatic64
Posts: 427
Joined: 16.08.2018
Age: 18
With us: 6 years 2 months
Location: Southern California

Post #652by SpaceFanatic64 » 09.09.2018, 15:14

Gurren Lagann, what do you mean by wait 3 hours to reach Eris? It just takes a couple of seconds for me.

Added after 1 minute 21 seconds:
And no, Toutatis never did release the Eris Explorer for Celestia, unfortunately.
If you see that I made a dumb or nonsensical post years ago, please forgive me in advance.
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #653by toutatis » 09.09.2018, 17:35

Also, now all we need to complete our collection of spacecrafts for Celestia is the STEREO A and B spacecrafts.

I will make it soon,.. no problem... I have these models in .3ds already... today made my own model... called Toutatis-2... later I will add textures, and will launch it to the asteroid Apophis... but I think need to join the impactor too, called JJPP...
Attachments
capture-20180909-230100.jpg
capture-20180909-203706.jpg
capture-20180909-212050.jpg
capture-20180909-190408.jpg
Top
Avatar
Gurren Lagann
Posts: 434
Joined: 31.01.2018
Age: 18
With us: 6 years 9 months
Location: State of Rio de Janeiro, Brazil

Post #654by Gurren Lagann » 09.09.2018, 20:03

SpaceFanatic64 wrote:Gurren Lagann, what do you mean by wait 3 hours to reach Eris? It just takes a couple of seconds for me..

The orbiter mission of the Eris Explorer takes 3 HOURS to make!

SpaceFanatic64 wrote:And no, Toutatis never did release the Eris Explorer for Celestia, unfortunately.

rip
"The tomorrow we're trying to reach is not a tomorrow you had decided on!"
- Simon the Digger
"Nothing is impossible for me, as long I'm determinated to keep moving forward!"
"If other people aren't going to do it, I'm going to do it myself!"
- Me (Gurren)

Current major projects:
- Aur Cir
- Cel+
- Project Sisyphus
- Populating the Local Group
- An galaxy generator
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #655by toutatis » 10.09.2018, 01:06

SpaceFanatic64 писал(а):
Gurren Lagann, what do you mean by wait 3 hours to reach Eris? It just takes a couple of seconds for me..

The orbiter mission of the Eris Explorer takes 3 HOURS to make!

SpaceFanatic64 писал(а):
And no, Toutatis never did release the Eris Explorer for Celestia, unfortunately.

rip
Guys... I will finish this model after I learn how to make orbits in Celestia without data from HORIZONS (NASA,JPL), ESA, Roscosmos, JAXA, etc...
I have still a lot of models which I did not published here ( russian spacecrafts too ) because I do not know orbital data of these spacecrafts...
With Stereo-A, B no problem... there is the orbital data from Horizons...
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #656by toutatis » 10.09.2018, 01:55

Stereo-A,B spacecrafts models in .3DS... but still need some work...
Attachments
capture-20180910-075105.jpg
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #657by toutatis » 10.09.2018, 13:11

I have fixed all visual defects of the STEREO model and prepared XYZV-files for STEREO-A,B.... still lot of work with the model, but I guess that STEREO add-on will be ready during this week...
Attachments
capture-20180910-183147.jpg
capture-20180910-183458.jpg
Top
Avatar
Topic author
toutatis
Posts: 744
Joined: 24.02.2018
Age: 55
With us: 6 years 8 months
Location: Almaty, Kazakhstan

Post #658by toutatis » 11.09.2018, 13:12

I just finished the main part of work with the STEREO model....
Attachments
capture-20180911-181617.jpg
Top
Avatar
CM1215 M
Posts: 221
Joined: 30.08.2017
Age: 22
With us: 7 years 2 months
Location: Ohio, U. S. A.

Post #659by CM1215 » 11.09.2018, 21:55

SpaceFanatic64 wrote:Awesome, toutatis! Nice work with the new model! However, though, I need the SSC code necessary for properly displaying the model in Celestia.

I agree. If you could do this, toutatis, it would be great!
CM1215: Celestial master in learning.
Top
Avatar
Diigg M
Posts: 54
Joined: 09.02.2011
With us: 13 years 8 months

Post #660by Diigg » 11.09.2018, 23:29

Congratulations to all, especially to @toutatis, for the incredible effort, the number of models and the speed in publishing them. Really impressive!

@toutais In July, you published a model of the launching base. viewtopic.php?p=139359#p139359
I thought it was an interesting and different addon and I wanted to try it.
It would be possible to get an ssc file to put it in the right place?.
I tried to create it myself, but despite having the coordinates (https://www.latlong.net/place/cape-canaveral-florida-usa-9780.html, I must be doing something wrong, since it does not put me in the right place.

It would be very cool to be able to see your Atlas-5-Centaur model take off from there.
If that is possible, do it with Celestia.

@DaveBowman2001 How do you put together two models of ships? Example: the Compton Gamma-Ray Observatory linked to the space shuttle Atlantis STS-37. viewtopic.php?p=139519#p139519

It would be very cool to see the satellite start from there. Is possible?

regards
Top
Locked

Return to “Add-on releases”