Anyone creating a new ISS model?
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
bh,
I downloaded the isscomplete.3ds from your site and used the texture pack issjpegs.zip. I then had to use 3dstocmod to change the file to ascii. I had to edit the file to change all the file names to lower case and replaced the bmp extension with jpg. The textures load as far as I can tell but as you can see from this screen shot, the words are mirrored. I only flipped the USA. Question is, How many of these textures do I have to flip?
cartrite
I downloaded the isscomplete.3ds from your site and used the texture pack issjpegs.zip. I then had to use 3dstocmod to change the file to ascii. I had to edit the file to change all the file names to lower case and replaced the bmp extension with jpg. The textures load as far as I can tell but as you can see from this screen shot, the words are mirrored. I only flipped the USA. Question is, How many of these textures do I have to flip?
cartrite
Last edited by cartrite on 24.10.2007, 17:47, edited 1 time in total.
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
Okay, I just used the file issjune07t.zip and converted that to cmod. There were 29 lines with upper case and bmp extensions. When I used the 3ds file unaltered, a lot of textures loaded but not all of course.
Edit: I am currently using openSuse10.2. I guess this all works correctly in Windows?
cartrite
Edit: I am currently using openSuse10.2. I guess this all works correctly in Windows?
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
Hello cartrite... yes... for the issjune07t (for truss) I had to re-link the tex files to the jpegs. They should ALL be in lower case. There may be referals to BMPs for the model that were not needed. I don't think this should cause any probs though.
I'll try do do a clean-up for the next release... I'm still confused as to whether I should go with jpegs OR stick with the original BMPs. Help!
As to the flipped images I'm pretty sure they're just the flags and logos... I think they're fixed now for the jpegs and I'm sure I've fixed the original texture pack (bmps).
Phew!
As to the model.... it's ready to go bar the textures... I will have to go through them one by one and re-link them. I'll try and do this tomorrow as my head is swimming!
The model will be as after Nov9 when 'Harmony' is attached to the front of the ISS.
I'll try do do a clean-up for the next release... I'm still confused as to whether I should go with jpegs OR stick with the original BMPs. Help!
As to the flipped images I'm pretty sure they're just the flags and logos... I think they're fixed now for the jpegs and I'm sure I've fixed the original texture pack (bmps).
Phew!
As to the model.... it's ready to go bar the textures... I will have to go through them one by one and re-link them. I'll try and do this tomorrow as my head is swimming!
The model will be as after Nov9 when 'Harmony' is attached to the front of the ISS.
regards...bh.
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
When using the linux system and the isscomplete.3ds, the screen said bmp's were loading but no textures were being rendered. This may have been a upper case issue also.
After I changed the upper case to lower and the remaining bmp extensions to jpg on the issjune07t.zip file, a few more textures were rendered. Not sure how many more though.
cartrite
After I changed the upper case to lower and the remaining bmp extensions to jpg on the issjune07t.zip file, a few more textures were rendered. Not sure how many more though.
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
Will the new model be posted on the main celestiamotherlode website or will you put it somewhere else?
bh wrote:Hello cartrite... yes... for the issjune07t (for truss) I had to re-link the tex files to the jpegs. They should ALL be in lower case. There may be referals to BMPs for the model that were not needed. I don't think this should cause any probs though.
I'll try do do a clean-up for the next release... I'm still confused as to whether I should go with jpegs OR stick with the original BMPs. Help!
As to the flipped images I'm pretty sure they're just the flags and logos... I think they're fixed now for the jpegs and I'm sure I've fixed the original texture pack (bmps).
Phew!
As to the model.... it's ready to go bar the textures... I will have to go through them one by one and re-link them. I'll try and do this tomorrow as my head is swimming!
The model will be as after Nov9 when 'Harmony' is attached to the front of the ISS.
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
bh,
Here is a screenshot from issjune07t .3ds
Here is a screen shot from issjune07t .cmod after I changed the remaining lines to lower case.jpg.
Also I'm using cvs version 09/09/2007 kde. In this version the model completely disappears in OGL2 render path.
As for the flipping issue, Your new releases will be fixing that?
I didn't see any logo's or flags, etc. on the issjune07t model.
cartrite
Here is a screenshot from issjune07t .3ds
Hello cartrite... yes... for the issjune07t (for truss) I had to re-link the tex files to the jpegs. They should ALL be in lower case. There may be referals to BMPs for the model that were not needed. I don't think this should cause any probs though.
Here is a screen shot from issjune07t .cmod after I changed the remaining lines to lower case.jpg.
Also I'm using cvs version 09/09/2007 kde. In this version the model completely disappears in OGL2 render path.
As for the flipping issue, Your new releases will be fixing that?
I didn't see any logo's or flags, etc. on the issjune07t model.
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
Blimey cartrite... my iss displays fine... not sure what's going on there... glad you got it to display correctly... it looks quite neat! As to the flipped flags/logos... there are all in the jpeg texture pack... there's no flags or logos on the model at the moment.
I'll make sure that the model just has references to the lowercase jpeg files NO uppercase or bmps.
I will upload the model to my webspace at bobhundley.com and link from here.
Must update my ISS page.
Now... what can go wrong?!
I'll make sure that the model just has references to the lowercase jpeg files NO uppercase or bmps.
I will upload the model to my webspace at bobhundley.com and link from here.
Must update my ISS page.
Now... what can go wrong?!
regards...bh.
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
I created a copy folder and flipped the logo's and flags for the isscomplete.cmod. Uppercase corrected. Looks pretty cool. Good job.
Hang in there. You'll get things sorted out. If you want I could email you the isscomplete and issjune07t cmods. I don't have the cmodto3ds tool though.
cartrite
Hang in there. You'll get things sorted out. If you want I could email you the isscomplete and issjune07t cmods. I don't have the cmodto3ds tool though.
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
When I wrote.
I found that it disappeared from the scene with that time stamp. The model is visible in OGL2, just not in the dark. When I move forward in time and it's in the daylight, it displays. The way it's supposed to I guess. But should it be rendered in the other render modes when it should be in the dark?
cartrite
In this version the model completely disappears in OGL2 render path.
I found that it disappeared from the scene with that time stamp. The model is visible in OGL2, just not in the dark. When I move forward in time and it's in the daylight, it displays. The way it's supposed to I guess. But should it be rendered in the other render modes when it should be in the dark?
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
-
- Site Admin
- Posts: 4211
- Joined: 28.01.2002
- With us: 22 years 9 months
- Location: Seattle, Washington, USA
cartrite wrote:When I wrote.I found that it disappeared from the scene with that time stamp. The model is visible in OGL2, just not in the dark. When I move forward in time and it's in the daylight, it displays. The way it's supposed to I guess. But should it be rendered in the other render modes when it should be in the dark?In this version the model completely disappears in OGL2 render path.
cartrite
Shadows on irregular objects only work in the OpenGL 2.0 render path. I haven't done the work to make them function properly in the other paths, and I have no plans to do so. But if someone else feels like doing this, I'd invite them to contribute.
--Chris
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
I wish I could help out there, but I only know enough about c++ to get into trouble. Long time ago, in a different lifetime it seems now, I used to be able to code assembler, fortran, cobol, and a little pascal. Back when the dino's ruled the earth. But I've forgotten most of it. What I can remember, I apply to c++. But that's what gets me in trouble.
cartrite
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
Here she is....
ISS post STS 120
http://www.bobhundley.com/celestia/issnov07.3ds.zip
840kb unzipped
Texture pack (Important...now jpegs)
http://www.bobhundley.com/celestia/issjpegs.zip
Couple of things... could do with Canadarm 2 on the truss... can someone make one to add to the model?
Also stringers for the mid rads extension mechanism are missing... shrug.
Many thanks to Andrew Farnaby for letting me mash up his fine model.
If someone would like to convert to cmod please go ahead.
ISS post STS 120
http://www.bobhundley.com/celestia/issnov07.3ds.zip
840kb unzipped
Texture pack (Important...now jpegs)
http://www.bobhundley.com/celestia/issjpegs.zip
Couple of things... could do with Canadarm 2 on the truss... can someone make one to add to the model?
Also stringers for the mid rads extension mechanism are missing... shrug.
Many thanks to Andrew Farnaby for letting me mash up his fine model.
If someone would like to convert to cmod please go ahead.
regards...bh.
-
- Posts: 1803
- Joined: 12.10.2007
- With us: 17 years 1 month
Thanks a LOT, Bob...
The first one was good too though... Appreciate your work on this stuff.
Take care, Bob
The first one was good too though... Appreciate your work on this stuff.
Take care, Bob
Brain-Dead Geezer Bob is now using...
Windows Vista Home Premium, 64-bit on a
Gateway Pentium Dual-Core CPU E5200, 2.5GHz
7 GB RAM, 500 GB hard disk, Nvidia GeForce 7100
Nvidia nForce 630i, 1680x1050 screen, Latest SVN
Windows Vista Home Premium, 64-bit on a
Gateway Pentium Dual-Core CPU E5200, 2.5GHz
7 GB RAM, 500 GB hard disk, Nvidia GeForce 7100
Nvidia nForce 630i, 1680x1050 screen, Latest SVN
I think now you can understand.Look at it:
http://img87.imageshack.us/my.php?image ... gedfc1.jpg
http://img88.imageshack.us/my.php?image ... alsal9.jpg
http://img87.imageshack.us/my.php?image ... agsyb3.jpg
http://img88.imageshack.us/my.php?image ... ed2ks6.jpg
You can see that the ISS model HAS textures,but SOME small details like e.g,the US flag and the NASA and ESA logo aren??t here.
I had EVEN used Photoshop to change the files from BMP to JPG,but it was of NO USE!And yes,I have the texture pack that I unzip to textures>medres.
Any ideas?
http://img87.imageshack.us/my.php?image ... gedfc1.jpg
http://img88.imageshack.us/my.php?image ... alsal9.jpg
http://img87.imageshack.us/my.php?image ... agsyb3.jpg
http://img88.imageshack.us/my.php?image ... ed2ks6.jpg
You can see that the ISS model HAS textures,but SOME small details like e.g,the US flag and the NASA and ESA logo aren??t here.
I had EVEN used Photoshop to change the files from BMP to JPG,but it was of NO USE!And yes,I have the texture pack that I unzip to textures>medres.
Any ideas?
danielj wrote:You didn??t understand.I had already downloaded the ISS texture pack,but it was of no use...bh wrote:The flags are NOT on the model at the moment. If you want to see the flags you should download the ISS complete model and texture pack (BMPs) from my site.
Oh crikey... If you're using the older models you must use the older texture pack (with the BMPs)... No harm in putting both sets of textures into your medres folder...
I'll have to check the ISS complete model myself... could be I didn't link the decals... never was much of a logo or flag man myself. Wait a minute... I'll relink the tex files for this model with the jpegs and re-upload. Later.
Bob... thanks a lot matey!
I'll have to check the ISS complete model myself... could be I didn't link the decals... never was much of a logo or flag man myself. Wait a minute... I'll relink the tex files for this model with the jpegs and re-upload. Later.
Bob... thanks a lot matey!
Last edited by bh on 25.10.2007, 13:20, edited 1 time in total.
regards...bh.
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
danielj,
cartrite
from http://www.celestiaproject.net/forum/viewtopic ... 4414#94414I didn't see any logo's or flags, etc. on the issjune07t model.
from http://www.celestiaproject.net/forum/viewtopic ... 4415#94415there's no flags or logos on the model at the moment
cartrite
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
- Hungry4info
- Posts: 1133
- Joined: 11.09.2005
- With us: 19 years 2 months
- Location: Indiana, United States