New Shuttle...

[ElChristou]

Hello,

I want to know if the actual ssc is good enough... (I don't remember where it come from...). If not, someone can do one? I even don't know the exact size of the shuttle...

[bh]

ElChristou...do you have a scenario in mind?...I have several ssc's for the shuttle.

Radius 0.020

regards...bh.

[sundog]

Radius 0.020

Here http://seds.lpl.arizona.edu/~ssa/docs/S ... eral.shtml it states the length as 122.17 feet = 37.23 metres.

So shouldn't it be: Radius 0.037

I'm no ssc or spacecraft expert so could be wrong.



sundog

[Cham]

Radius 0.020

Here http://seds.lpl.arizona.edu/~ssa/docs/S ... eral.shtml it states the length as 122.17 feet = 37.23 metres.

So shouldn't it be: Radius 0.037

I'm no ssc or spacecraft expert so could be wrong.



sundog

State of the Art Rocket Science :

Length = 37.23 meters

Radius = half length = L/2 = 18.6 meters

so radius approximately 0.020 km.

[sundog]

Radius = half length = L/2 = 18.6 meters

Doh, of course it is


I'ts late here in UK, I was thinking of diameter .... I need some sleep.



sundog

[ElChristou]

Tx to all of yours...

...ElChristou...do you have a scenario in mind?...I have several ssc's for the shuttle...

Not really... I haven't found yet which mission to illustrate... For now I'm collecting more documents for the payload bay...

If you have a basic ssc just for the orbiting it's ok for me because I really not sure of the one in the prerealease...

[Cham]

As a scenario, you could represent the encounter of the shuttle with some alien spaceship from the parallel inner world.

[selden]

The Atlantis has flown on several classified missions. All that's known are the approximate orbital parameters. They won't say what they did...

[Ariane]

He bien, he bien, le gar?§on s'est fait prendre les culottes baiss?©es ! Non mais vraiment, quelle bande de machos, ces gamins scientifiques ! Tssk, tssk ! ROFL'N LOL Humm ! Bon d'accord, je m'efface derri??re mon sourrire...

Cool ce forum !
on peut m??me "causer" notre bonne vielle langue....?  savoir le french ! D?©cid?©ment j'aime beaucoup cette communaut?© !
Au fait ...

Salut Cham !
Au passage je voulais te f?©liciter pour tes addons notamment ceux sur les trous noirs... j'en ai ?©pat?© plus d'un avec ! et surtout les fondus d'Univers (comme moi ... !)
F?©licitation donc et mes plus vifs et sinc??res encouragements !

Cordialement,

PS: dans le cadres de ma th??se je prend des cours d'anglais (passage oblige pour publier et ??tre connu....) et je suis en train de pr?©parer une pr?©sentation en English:le sujet ?©tant libre (on veut juste nous apprendre ?  bien pr?©senter pour la future soutenance ... ), devine ce que j'ai pris.... Eh oui, les trous noirs ! en fait je l'avais d?©j?  fait en fran?§ais il y a un moment... mais ?  l'?©poque je n'avais pas Celestia et tes addons.... Ca t'ennui si je reprend quelques illustrations ? en citant la source, of course ! Sinon no prob ! j'ai pleins d'autres sources ... mais ce n'est pas Celestia ...

[Ariane]

Ariane, welcome back!
(did you finish your PhD, perhaps?)

Greetings Fridger !
No, my PhD finished only in 2 years, and I'm not hurried ! The naval academy where I'm doing my work is so beautiful !!! Moreover the teatchers are very nice !

With two (academic) woman around myself in the family, I must confess that our "cuisini??re (?©lectrique)" has not been used in fact for years .

Alors ? on fait moins le malin lorsque les femmes s'en m??lent ?
==> Then? one makes less clever when the women interfere themselves ? (but i'm not really sure that the translation is correct 'cause it's an expression ... )

Of course I am a bad boy. Everyone here knows that
Bye Fridger

C'est du joli !
==>Shame on you !!!


Regards,

[ElChristou]

...Eh oui, les trous noirs ! en fait je l'avais d?©j?  fait en fran?§ais il y a un moment... mais ?  l'?©poque je n'avais pas Celestia et tes addons.... Ca t'ennui si je reprend quelques illustrations ? en citant la source, of course ! Si oui, no prob ! j'ai pleins d'autres sources ... mais ce n'est pas Celestia ...

Salut, Ariane

Super garde bien au chaud toute tes sources car le th??me m'int?©resse aussi (bien entendu au niveau de la mod?©lisation... j'suis pas un expert en astrophysique )... Le travail de Cham est vraiment super, mais j'aimerais faire des d?©riv?©s avec d'autres mod??les de jets (surtout pour la partie finale...)... bref d'autre projet en vue...

A++

----
Hi, Ariane

Great, keep all your sources from a side cause I'm quite interested in the topic (at the modelisation level, as I'm not an astrophysic expert )... Cham's work is very impressive, but I want to create other model of jets (principally for the ending)... In brief, more project for the future...

Bye

[Ariane]

Salut, Ariane

Super garde bien au chaud toute tes sources car le th??me m'int?©resse aussi (bien entendu au niveau de la mod?©lisation... j'suis pas un expert en astrophysique )... Le travail de Cham est vraiment super, mais j'aimerais faire des d?©riv?©s avec d'autres mod??les de jets (surtout pour la partie finale...)... bref d'autre projet en vue...

A++

----
Hi, Ariane

Great, keep all your sources from a side cause I'm quite interested in the topic (at the modelisation level, as I'm not an astrophysic expert )... Cham's work is very impressive, but I want to create other model of jets (principally for the ending)... In brief, more project for the future...

Bye

Salut ElChristou...
Whaouoooooo
En voila une bonne nouvelle ! je te rassure, je ne suis pas non plus astrophysicienne, juste un g?©ologue passionn?©e par l'Univers, la naissance des ?©toiles et bien sur la formation de notre bonne vielle terre ! J'ai lus pas mal de chose sur les trous noirs vu que le sujet me passionne, et effectivement, niveau mod?©lisation, il y a encore beaucoup ?  explorer ...
Donc si je peux t'aider en quoi que ce soit ... j'en serais tr??s heureuse !!!

--
Greetings ElChristou.
cool ! what such a good news ! don't worried, i'm not an astrophysic expert no more, just a geologist found of Univers, birth of stars and of course the formation of our great old earth !
I've read a lot about black hole and indeed there still have a lot of things to explore at a modelisation level.
If I can help you, it will be a pleasure for me !

[ElChristou]

En voila une bonne nouvelle ! je te rassure, je ne suis pas non plus astrophysicienne, juste un g?©ologue passionn?©e par l'Univers, la naissance des ?©toiles et bien sur la formation de notre bonne vielle terre ! J'ai lus pas mal de chose sur les trous noirs vu que le sujet me passionne, et effectivement, niveau mod?©lisation, il y a encore beaucoup ?  explorer ...
Donc si je peux t'aider en quoi que ce soit ... j'en serais tr??s heureuse !!!

On reparlera de ?§a dans un futur plus ou moins proche

A+

[ElChristou]

To everybody.

Meanwhile I'm working on the cockpit and the payload, you can now download the preliminary model from ML (I have deleted the previous link):

http://www.celestiamotherlode.net/creators/elchristou/EC_Atlantis.zip

Bye.

[ElChristou]

As the modeling is slowing down due to an overload of regular work, here is the actual state of the filght deck:



Bye

[bh]

Bloody hell!

regards...bh.

[Michael Kilderry]

That looks very complex!

Michael

[selden]

For what it's worth, I've been reviewing my old "Space Shuttle Operators Manual" and the 2001 edition of a history of the shuttle. Both of them show a total of four seats in the cockpit, with two seats in the rear for mission specialists, not just one.

However, I wouldn't be a bit surprised if they take one of them out for some flights.

[ElChristou]

...However, I wouldn't be a bit surprised if they take one of them out for some flights...

Yes, looking at the floor, there is some "attach points" for a fourth seat... as there is not so much space in this tiny room, I think I will keep 3 seats for better viewing...

[ElChristou]

Work in progress: Flight deck: 50% over...

First rendering test in Celestia:



Bye