Posted: 08.10.2020, 05:13
SS Atlantis... closing the payload doors... also I will change and add engines... also I will correct textures to make Challenger, Discovery, Endeavour, and Columbia...
Celestia Forums
Real-time 3D visualization of space
https://celestiaproject.space/forum/
Spacecrafts for Celestia
https://celestiaproject.space/forum/viewtopic.php?f=23&t=18024
Page 72 of 99
Posted: 09.10.2020, 05:34
Space Shuttle "Atlantis"... Base model from NASA after modification by Toutatis... orbital data is fictional...
Posted: 09.10.2020, 12:22
Ah... not mine then...
Never mind.
I use the shuttles from Linuxmans ISS scenario.
They and the NASA model are based on my old models.
Never mind.
I use the shuttles from Linuxmans ISS scenario.
They and the NASA model are based on my old models.
Posted: 09.12.2020, 19:11
I made updates an new constellation of satellites : BLACKSKY GLOBAL by Spaceflight industries
6 satellites have already been launched (the last by Falcon 9) out of 60 planned
6 satellites have already been launched (the last by Falcon 9) out of 60 planned
Posted: 10.12.2020, 08:45
I planned to complete the STARLINK launches:
StarlinkWebFleet10
StarlinkWebFleet11
StarlinkWebFleet12
StarlinkWebFleet13
StarlinkWebFleet14
StarlinkWebFleet15
StarlinkWebFleet16
because SpaceX does not stubble. This represents approximately 400 new satellites in the Starlink constellation.
As I am updating the Trojan asteroids, I will have to wait a bit.
StarlinkWebFleet10
StarlinkWebFleet11
StarlinkWebFleet12
StarlinkWebFleet13
StarlinkWebFleet14
StarlinkWebFleet15
StarlinkWebFleet16
because SpaceX does not stubble. This represents approximately 400 new satellites in the Starlink constellation.
As I am updating the Trojan asteroids, I will have to wait a bit.
Posted: 10.12.2020, 13:20
It would be cool to have also the Tesla car orbiting the Eart 
Posted: 10.12.2020, 17:49
addon de G. Abramson for Tesla roadster
Posted: 11.12.2020, 06:27
Philae lander with legs deployed on the surface of 67P/Churyumov-Gerasimenko....
The model is from http://scifleet.esa.int/#/model-downloads, and the landing coordinates are the ones posted by gironde in previous pages. This is my first attempt in making CMOD models
Placing the lander onto the surface of the comet without floating in Celestia is tricky, in addition to the exact landing coordinates of Philae is still unknown today (although it is defined as Abydos in the ESA website, not far from where Rosetta itself crash landed two years later). Not sure about the radius parameter, just taken straight off from toutatis' work.
Requires toutatis' Rosetta addon (nothing will be overwritten except for the SSC file) and Celestia Origin for 67P
The model is from http://scifleet.esa.int/#/model-downloads, and the landing coordinates are the ones posted by gironde in previous pages. This is my first attempt in making CMOD models
Placing the lander onto the surface of the comet without floating in Celestia is tricky, in addition to the exact landing coordinates of Philae is still unknown today (although it is defined as Abydos in the ESA website, not far from where Rosetta itself crash landed two years later). Not sure about the radius parameter, just taken straight off from toutatis' work.
Requires toutatis' Rosetta addon (nothing will be overwritten except for the SSC file) and Celestia Origin for 67P
Posted: 11.12.2020, 08:58
Thanks, come in handy.DaveBowman2001 wrote:Philae lander with legs deployed on the surface of 67P/Churyumov-Gerasimenko
Posted: 24.12.2020, 01:19
Merry Christmas guys!
Posted: 24.12.2020, 07:03
toutatis wrote:Merry Christmas guys!
U2 !
Posted: 24.12.2020, 09:37
Posted: 17.01.2021, 00:31
Posted: 24.01.2021, 11:01
Hi. It's not working for me.
I have used the Rosetta addon from Toutatis overwriting the ssc file, but then it doesn't show me the probe at any time. Besides, Philae never appears to me landed on the comet.
I have verified that I have all the models, data, textures, etc. in the corresponding places.
In fact, with the original Toutatis add-on, everything works perfectly (except for a problem with the trajectory during the Mars flyby, where the probe passes through the planet instead of flying over it). Without the addition of the lander perched on the surface, obviously.
I've checked everything multiple times (code, folders, etc.) but can't find the error.
You can help? It would be cool to have the entire mission complete.
Thank you
I have used the Rosetta addon from Toutatis overwriting the ssc file, but then it doesn't show me the probe at any time. Besides, Philae never appears to me landed on the comet.
I have verified that I have all the models, data, textures, etc. in the corresponding places.
In fact, with the original Toutatis add-on, everything works perfectly (except for a problem with the trajectory during the Mars flyby, where the probe passes through the planet instead of flying over it). Without the addition of the lander perched on the surface, obviously.
I've checked everything multiple times (code, folders, etc.) but can't find the error.
You can help? It would be cool to have the entire mission complete.
Thank you
Posted: 06.02.2021, 14:27
new Starlink launches by SpaceX:
07-08-2020
13-08-2020
03-09-2020
files ssc, tables lua for Vidiba, and generic model (satgeneric.cmod)
source : https://celestrak.com/satcat/search.php
extract by orbit_translate python module version 1.0
(it would be nice if someone could provide the real model for the Starlink satellites)
07-08-2020
13-08-2020
03-09-2020
files ssc, tables lua for Vidiba, and generic model (satgeneric.cmod)
source : https://celestrak.com/satcat/search.php
extract by orbit_translate python module version 1.0
(it would be nice if someone could provide the real model for the Starlink satellites)
Posted: 08.02.2021, 13:08
more Starlink launches by SpaceX:
06-10-2020
18-10-2020
24-10-2020
25-11-2020
20-01-2021
24-01-2021
(the launch of 04-02-2021 has not yet been published)
Added after 2 hours 12 minutes:
the Sentinel satellites of the Copernicus program
https://en.wikipedia.org/wiki/Copernicus_Programme#Sentinel_missions
06-10-2020
18-10-2020
24-10-2020
25-11-2020
20-01-2021
24-01-2021
(the launch of 04-02-2021 has not yet been published)
Added after 2 hours 12 minutes:
the Sentinel satellites of the Copernicus program
https://en.wikipedia.org/wiki/Copernicus_Programme#Sentinel_missions
Posted: 09.02.2021, 07:13
4th launch of Oneweb on 12-18-2020
ESA's meteo satellite program with Metesat and MetOp satellites
Meteosat update (ssc) replace the first file in Eumetsat (ESA).7z
ONEWEB (USA).7z- (49.07 KiB) Downloaded 183 times
ESA's meteo satellite program with Metesat and MetOp satellites
- EUMETSAT (Esa).7z
- (47.6 KiB) Downloaded 200 times
Meteosat update (ssc) replace the first file in Eumetsat (ESA).7z
- Meteosat update.7z
- (1.09 KiB) Downloaded 174 times
Posted: 13.02.2021, 10:53
Sierra Nevada Corporation Dream Chaser by Endeavor35
https://celestia.space/forum/viewtopic.php?p=152553#p152553
Added after 17 minutes 54 seconds:
Yesterday, the United Arab Emirates probe, Hope, joined Mars. Horizons provides us with its cruise, but not the orbital data around Mars. It will be necessary to wait.
For the 3D model that cannot be found on the web yet, I used the one from Venu-Express which looks like it.
In the meantime, we can visualize its orbit from Earth to Mars.
https://celestia.space/forum/viewtopic.php?p=152553#p152553
Added after 17 minutes 54 seconds:
Yesterday, the United Arab Emirates probe, Hope, joined Mars. Horizons provides us with its cruise, but not the orbital data around Mars. It will be necessary to wait.
For the 3D model that cannot be found on the web yet, I used the one from Venu-Express which looks like it.
In the meantime, we can visualize its orbit from Earth to Mars.
- Hope.7z
- (1.92 MiB) Downloaded 222 times
Posted: 14.02.2021, 06:23
SpaceX Starship
Updated to match the radius described by Gironde.
Updated to match the radius described by Gironde.
Posted: 14.02.2021, 15:29
he almost traveled with Hope, left almost at the same time and arrived a few days apart, it is Tianwen-1 launched by China on 23-07-2020 and put into orbit around Mars on 10-02 -2021
model 3D generic : Venus-Express
Added after 44 minutes 31 seconds:
Endeavor35
SpaceX Starship
it's cargo' version (height 18m diam 9m)
correction in ssc :
Radius 0.009 # height 18m x diam 9m the model must have a Radius 18m/2
#Ending " "
Starship complet : 122m
Starship first stage : 22m
Starship second stage : 50m
Starship cargo version : 18m
Starship crew version
Starchip tanker version
Starship lunar version
model 3D generic : Venus-Express
Added after 44 minutes 31 seconds:
Endeavor35
SpaceX Starship
it's cargo' version (height 18m diam 9m)
correction in ssc :
Radius 0.009 # height 18m x diam 9m the model must have a Radius 18m/2
#Ending " "
Starship complet : 122m
Starship first stage : 22m
Starship second stage : 50m
Starship cargo version : 18m
Starship crew version
Starchip tanker version
Starship lunar version