Venus Transit of Jupiter in 1818

[selden]

On January 3rd, 1818, Venus transited Venus as seen from the north Pacific. Nobody recorded seeing it though.

Here's Celestia's view of that event, shortly after first contact
(this is a link to a high resolution image.)

The viewpoint is from over Hawaii.
Venus has no clouds in this interpretation.
Ganymede is also visible. I suspect it'll be in a slightly different position when seen using 1.2.5 final.

[alegator]

How do you generate that view? how do you make Jupiter so big in the background? Thanks.

[John Van Vliet]

one way is to go to venus set to fallow then use the "."(thatis >/.)to tellophoto in and use the (end) key to zoom out


play with the </, and the >/. (, .) keys

and the (end),(home) keys

have fun

[selden]

I didn't do anything special to get the relative sizes, other than to try to emulate an Earth-bound observer. Here's one way to do it:

1) go to an appropriate date,
2) turn on "sync orbit"
(so the Earth-relative position doesn't change by accident)
3) go to an appropriate viewing location
4) select one of the two planets
5) turn on "track"
6) increase magnification until they're visible
(If you're using high resolution textures, some of the magnification steps will be very slow when the planet images change from dots to circles)

Celestia makes it all too easy...

[Borg Collective]

On January 3rd, 1818, Venus transited Venus as seen from the north Pacific.

You mean "...Venus transited Jupiter..."

[selden]

picky, picky...

[Guest]

I used your instructions to see that transit of venus over Jupiter. I was wondering if your altitude you place yourself was higher than mine. My altudite was .03 meters off the surface of earth over the big island of hawlii. If so it was daylight when the transit occur and thats why nobody recorded it. Check it out and see.

Also I want to thank you for posting your instructions for this. I'm just learning how to use this program and its fun and like you said

"celesita makes it easy" that is if you know how to follow instruction like the one you posted.

[t00fri]

The two most convenient shortcuts to play with in the above context are:

1) /Zoom/, i.e changing the /field of view/: SHIFT + dragging left mouse key

By pushing the /middle/ mouse key (wheel button) repeatedly, you
toggle between the last field of view and the standard field of view of 45 degrees. This is most handy to quickly switch between a /telescopic view/ (small FoV) and a naked eye view (FoV=45deg) of the object.

2) /Distance/ changing: CTRL + dragging left mouse key

These provide very smooth adjustments. It is completely trivial this way, for example, to arrive at a widely different apparent size ratio of Venus and Jupiter above.

Landing on an object (e.g. earth) at a particular spot is done as follows:

Select the spot where you want to land from space and place yourself right vertically over it. Then press the HOME key and watch the distance decreasing (top left in the display). Stop latest at about 20m above surface, in order to avoid residual instabilities. Then push the new 'look back' key: '*' that I incorporated in 1.2.5. and then you enter|select the object you want to look at and finally push 'c' to center it in the field. Now you are ready for zooming in etc.

Bye Fridger