MRO SPICE orbit not displayed
MRO SPICE orbit not displayed
Hello all,
I am trying to get together Celestia with SPICE support to have an idea when MRO is visible from earth.. so I installed a recently CVS compiled version for win32.. the executable is 2.5 MB large so I suppose the SPICE libraries are included. I created MRO.ssc and downloaded the bsp SPICE files as described by symaski62 [url=http://www.celestiaproject.net/forum/viewtopic.php?t=10112&start=30] here [/url] but still, I cannot find MRO in the Celestia program.. and yes, I was looking in the right time frame, specified by the bsp files..
Any ideas? I am sure, I am missing something very simple..
Reason to look for orbital data: I would like to compare with actual AOS/LOS of MRO.
Thanks!
Achim, DH2VA/HB9DUN
I am trying to get together Celestia with SPICE support to have an idea when MRO is visible from earth.. so I installed a recently CVS compiled version for win32.. the executable is 2.5 MB large so I suppose the SPICE libraries are included. I created MRO.ssc and downloaded the bsp SPICE files as described by symaski62 [url=http://www.celestiaproject.net/forum/viewtopic.php?t=10112&start=30] here [/url] but still, I cannot find MRO in the Celestia program.. and yes, I was looking in the right time frame, specified by the bsp files..
Any ideas? I am sure, I am missing something very simple..
Reason to look for orbital data: I would like to compare with actual AOS/LOS of MRO.
Thanks!
Achim, DH2VA/HB9DUN
- cartrite
- Posts: 1978
- Joined: 15.09.2005
- With us: 19 years 1 month
- Location: Pocono Mountains, Pennsylvania, USA Greate Grandfother from Irshava, Zakarpattia Oblast Ukraine
If the cvs version was installed by the setup I provided in the developers forum, Win-cvs version setup.exe installer.
I did not enable Spice Support.
cartrite
I did not enable Spice Support.
cartrite
Last edited by cartrite on 26.10.2006, 20:43, edited 3 times in total.
VivoBook_ASUSLaptop X712JA_S712JA Intel(R) UHD Graphics 8gb ram. Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz, 1190 Mhz, 4 Core(s), 8 Logical Processor(s) 8 GB ram. Running on Windows 11 and OpenSuse 15.4
You will only find MRO in Celestia if you yourself defined that object name in your SSC catalog file. Did you?
Please post a copy of the SSC file that you created as well as the exact source and name(s) of the SPICE kernels that you downloaded.
Note that you also must specify in the SPICE orbit definition the spacecraft name or spacecraft number that is defined in the SPICE kernel. Often the name or spacecraft number specified in the kernel isn't what you might expect.
Please post a copy of the SSC file that you created as well as the exact source and name(s) of the SPICE kernels that you downloaded.
Note that you also must specify in the SPICE orbit definition the spacecraft name or spacecraft number that is defined in the SPICE kernel. Often the name or spacecraft number specified in the kernel isn't what you might expect.
Selden
Hello..
I made an exact copy and paste of the MRO.ssc from symaski62 file in the post I mentioned in my question. The bsp files have the names given in the ssc file.
Actuelly MRO is called Spice_MRO in the file.. but it cannot be found in Celestia.
The version I installed was the precompiled verion of malenfant (1.5.0) Could this be the problem?
Achim
I made an exact copy and paste of the MRO.ssc from symaski62 file in the post I mentioned in my question. The bsp files have the names given in the ssc file.
Actuelly MRO is called Spice_MRO in the file.. but it cannot be found in Celestia.
The version I installed was the precompiled verion of malenfant (1.5.0) Could this be the problem?
Achim
dh2va wrote:Hello..
I made an exact copy and paste of the MRO.ssc from symaski62 file in the post I mentioned in my question. The bsp files have the names given in the ssc file.
Actuelly MRO is called Spice_MRO in the file.. but it cannot be found in Celestia.
The version I installed was the precompiled verion of malenfant (1.5.0) Could this be the problem?
Achim
ok http://www.purebytes.de/stuff/celestia/ update 10/24/2006
windows 10 directX 12 version
celestia 1.7.0 64 bits
with a general handicap of 80% and it makes much d' efforts for the community and s' expimer, thank you d' to be understanding.
celestia 1.7.0 64 bits
with a general handicap of 80% and it makes much d' efforts for the community and s' expimer, thank you d' to be understanding.
Does a non-Spice MRO SSC file work for you?
Too often these problems are caused by typos that aren't obvious until you compare a working version with a non-working version.
Using someone else's example won't always work if you aren't using exactly the same versions of the software, especially when the code is in rapid flux, as it is now. You need to understand what is actually going on to figure out what's failing.
In other words, you should try to create a SPICE SSC yourself by following the descriptions available and build Celestia from the code currently available from SourceForge. Doing anything else is likely to be a waste of time.
Too often these problems are caused by typos that aren't obvious until you compare a working version with a non-working version.
Using someone else's example won't always work if you aren't using exactly the same versions of the software, especially when the code is in rapid flux, as it is now. You need to understand what is actually going on to figure out what's failing.
In other words, you should try to create a SPICE SSC yourself by following the descriptions available and build Celestia from the code currently available from SourceForge. Doing anything else is likely to be a waste of time.
Selden
Dear Selden,
hmm.. this sounds more complicated than I expected.. I am one of the 'dumb' windows users who don't even have a c compiler.. So I will have to wait for a compiled version with Spice support and a SPICE data set.
That said, could maybe anybody just zip his spice-working Celestia subdir and I will try this here?
Cheers,
Achim
hmm.. this sounds more complicated than I expected.. I am one of the 'dumb' windows users who don't even have a c compiler.. So I will have to wait for a compiled version with Spice support and a SPICE data set.
That said, could maybe anybody just zip his spice-working Celestia subdir and I will try this here?
Cheers,
Achim
Achim,
Have you looked at Celestia's console log? That sometimes can tell you what's going wrong.
Type a tilde (~) to see it while Celestia is running. On a European keyboard you may have to type a space after the tilde. Use the up/down arrow keys to look at earlier messages. You also should remove all other Addons. Otherwise status messages from those others will hide the one or two lines that are due to the one that has a problem.
Have you looked at Celestia's console log? That sometimes can tell you what's going wrong.
Type a tilde (~) to see it while Celestia is running. On a European keyboard you may have to type a space after the tilde. Use the up/down arrow keys to look at earlier messages. You also should remove all other Addons. Otherwise status messages from those others will hide the one or two lines that are due to the one that has a problem.
Selden
-
- Site Admin
- Posts: 4211
- Joined: 28.01.2002
- With us: 22 years 9 months
- Location: Seattle, Washington, USA
Could you post your ssc file for MRO? I'm wondering if you might just need to add Beginning and Ending fields to set the range of your SPICE orbit. For example, this would set the valid range to be midnight Oct 1, 2006 to noon Oct 31:
Beginning "2006 10 1 00:00:00"
Ending "2006 10 31 12:00:00"
--Chris
Beginning "2006 10 1 00:00:00"
Ending "2006 10 31 12:00:00"
--Chris
dh2va wrote:That said, could maybe anybody just zip his spice-working Celestia subdir and I will try this here?
my compiled celestia-version includes SPICE, thats why the executable is so big
most recent celestia win32-SVN-build - use at your own risk (copy over existing 1.5.1 release)
oups charge update
ftp://naif.jpl.nasa.gov/pub/naif/MRO/kernels/spk/
START_TIME=2006-10-12T07:35:00.000
STOP_TIME=2006-12-05T16:15:00.000
=> spk_psp_rec00990_00986_01684_p-v1.bsp ( 65Mo )
=> spk_psp_rec00990_00986_01684_p-v1.bsp.lbl
Go Go Go !!!
ftp://naif.jpl.nasa.gov/pub/naif/MRO/kernels/spk/
START_TIME=2006-10-12T07:35:00.000
STOP_TIME=2006-12-05T16:15:00.000
=> spk_psp_rec00990_00986_01684_p-v1.bsp ( 65Mo )
=> spk_psp_rec00990_00986_01684_p-v1.bsp.lbl
Go Go Go !!!
windows 10 directX 12 version
celestia 1.7.0 64 bits
with a general handicap of 80% and it makes much d' efforts for the community and s' expimer, thank you d' to be understanding.
celestia 1.7.0 64 bits
with a general handicap of 80% and it makes much d' efforts for the community and s' expimer, thank you d' to be understanding.
Well, there seem to be some problems with how Celestia displays spice orbits, but it isn't with the MRO itself.
Here's what I see, using a version of Celestia built from cvs on October 22nd
The MRO (at the right edge of Mars) actually orbits above the surface, despite what the orbit path seems to claim
Here's a CEL URL that should take you to this viewpoint
mro viewpoint
And here's the SSC that I used ( \Addons\spice_mro\spice_mro.ssc )
The naif binary spice file listed in symaski62's post just above this was placed in
\Addons\spice_mro\data\
Here's what I see, using a version of Celestia built from cvs on October 22nd
The MRO (at the right edge of Mars) actually orbits above the surface, despite what the orbit path seems to claim
Here's a CEL URL that should take you to this viewpoint
mro viewpoint
And here's the SSC that I used ( \Addons\spice_mro\spice_mro.ssc )
Code: Select all
"spice_mro" "Sol/Mars" {
Radius 0.01
Color [ 1 1 0]
Beginning "2006 10 12 07:35:01"
Ending "2006 12 05 16:14:59"
SpiceOrbit
{
Kernel "spk_psp_rec00990_00986_01684_p-v1.bsp"
Target "-74" # MARS RECON ORBITER
Origin "4" # MARS BARYCENTER
BoundingRadius 1e32
Beginning "2006 10 12 07:35:01"
Ending "2006 12 05 16:14:59"
}
}
The naif binary spice file listed in symaski62's post just above this was placed in
\Addons\spice_mro\data\
Selden
-
- Site Admin
- Posts: 4211
- Joined: 28.01.2002
- With us: 22 years 9 months
- Location: Seattle, Washington, USA
selden wrote:Well, there seem to be some problems with how Celestia displays spice orbits, but it isn't with the MRO itself.
It's a result of Celestia seriously undersampling the orbit. I need to figure out how to make Celestia choose the number of points to use to draw an orbit. Making a nice rendering of a low planetary orbit over a long timespan requires a *lot* of points.
--Chris
Dea all,
I GOT IT: the ~ typing helped in finding the problem, which was with missing Beginning and Ending timestamps in the SSC file.. now i can plot MRO, but getting the same problem with the undersampled orbit... but it is a big step forward!
Now I am going to modify my files accordingly, so the 3d model from motherlode is displayed correctly.
Thanks again,
Achim
I GOT IT: the ~ typing helped in finding the problem, which was with missing Beginning and Ending timestamps in the SSC file.. now i can plot MRO, but getting the same problem with the undersampled orbit... but it is a big step forward!
Now I am going to modify my files accordingly, so the 3d model from motherlode is displayed correctly.
Thanks again,
Achim
MRO orbit seriously wrong
Hello again..
checking now for the MRO orbit, I have to say it is seriously wrong. I guess some transformation of coordinates went nuts..
[img]http://www.physik.unizh.ch/~avollhar/celestia/celestia_mro.jpg[/img]
Disregard MO and MGS orbits.. but according to JPL/NASA, MRO is in an orbit inclined 92.6 deg, meaning passing amost directly over the poles.. which is not the case.
Any ideas?
Cheers,
Achim[/img]
checking now for the MRO orbit, I have to say it is seriously wrong. I guess some transformation of coordinates went nuts..
[img]http://www.physik.unizh.ch/~avollhar/celestia/celestia_mro.jpg[/img]
Disregard MO and MGS orbits.. but according to JPL/NASA, MRO is in an orbit inclined 92.6 deg, meaning passing amost directly over the poles.. which is not the case.
Any ideas?
Cheers,
Achim[/img]
Specifying the reference plane is a new option in Celestia v1.5. The only documentation available is what Chris has written about it. I've collected his descriptions of the new reference frame features at
http://www.lepp.cornell.edu/~seb/celest ... .html#5.10
Documentation for the older SSC features is availble on the Motherlode on the documentation page at
http://celestiamotherlode.net/catalog/d ... ation.html
.
http://www.lepp.cornell.edu/~seb/celest ... .html#5.10
Documentation for the older SSC features is availble on the Motherlode on the documentation page at
http://celestiamotherlode.net/catalog/d ... ation.html
.
Selden