My Latest & Best Titan Texture for Download, NOW

General discussion about Celestia that doesn't fit into other forums.
Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

My Latest & Best Titan Texture for Download, NOW

Post #1by t00fri » 13.03.2005, 17:04

March, 13. 2005

Hi all,

This is by far my best, most detailed and most accurate Titan surface texture to date.

It incorporates all the hi-res global imaging information from Cassini's flybys over the past year, both as it approached the Saturn system and during three closer flybys in July, October and December 2004.

As raw resource for my texture served the very recently published 4256x1744 summary mosaic from

http://photojournal.jpl.nasa.gov/catalog/PIA06201

Of particular interest is the vast amount of new imaging data in the south polar regions, with a wealth of long 'river-beds', drainage channels, clouds etc. visible.

In addition, my texture incorporates all six recent close-up mosaics of Titan's surface. They are each composed of many images acquired by the Cassini spacecraft during flybys in October (see PIA06158) and December (see PIA06159) of 2004. The close-ups also include a most detailed mosaic of the Huygens landing site and its environment.

The raw sources were published here
just a few days ago,

http://photojournal.jpl.nasa.gov/catalog/PIA06204

My new Titan map has state of the art accuracy, since the cylindrical projection work was done by the Cyclops imaging group, which certainly has more information than we do...

The composition of these various official imaging resources
required a lot of careful tuning work for a pleasing display in
Celestia, such as smoothing and blending all transition boundaries, rescaling, locating and blending in the six close-up layers etc.

As one illustration, a 'raw' close-up (top) and my final input layer for my new texture (bottom).

Image

Finally, as in my previous Titan textures, coloration was done entirely by computer, using the familiar 'natural color' photo from the Huygens landing site as a color template

http://saturn.jpl.nasa.gov/multimedia/i ... ageID=1310


Here is a 'tiny' 800x400 reduction of my new 4k cylindrical surface texture map. Unlike the original, I added an offset by width/2 to make the Xanadu region with all the hires features appear in the image center.

Image

Next, two global views of the new texture 'in action' from two different perspectives! Note the amazing 'long river beds' in the southern hemisphere!

Image

Finally, an illustration of the amazing amount of detail visible due to the new close-ups I have included. The top image is the Huygens landing site with its environment!

Image

************************************************
Here is the URL, on my TextureFoundry site for downloading
the new ZIP archive (6.7 MB)

http://www.shatters.net/~t00fri/titan-march05.zip

************************************************
-------------
Installation:
-------------

My Titan texture provides a 4k view of Titan's surface. The thick orange haze layer is to be taken from the official Celestia distribution. It is not contained in the present package.

Just unzip the present titan-march05.zip archive in your 'extras' folder. Your default texture of Titan will then be modified automatically.


Enjoy,

Bye Fridger
Last edited by t00fri on 13.03.2005, 23:29, edited 4 times in total.

Bob Hegwood
Posts: 1048
Joined: 19.10.2003
With us: 21 years 1 month
Location: Germantown, Ohio - USA

Post #2by Bob Hegwood » 13.03.2005, 17:41

Fridger,

Just wanted to thank you for this beautiful texture. I'll have to reduce it a
bit in order to use it on my machine, but it's far better than any other
Titan texture I've seen.

Again, thanks very much for the beautiful texture and your hard work.

Take care, Bob
Bob Hegwood
Windows XP-SP2, 256Meg 1024x768 Resolution
Intel Celeron 1400 MHz CPU
Intel 82815 Graphics Controller
OpenGL Version: 1.1.2 - Build 4.13.01.3196
Celestia 1.4.0 Pre6 FT1

ElChristou
Developer
Posts: 3776
Joined: 04.02.2005
With us: 19 years 9 months

Post #3by ElChristou » 13.03.2005, 22:19

Tx Fridger, this is amazing...
Image

Beowulf01
Posts: 138
Joined: 28.09.2004
With us: 20 years 1 month
Location: LaGrange Missouri

Titan

Post #4by Beowulf01 » 13.03.2005, 22:29

WOW!!!!
damm nice.. I see you put a LOT of work into that.

rthorvald
Posts: 1223
Joined: 20.10.2003
With us: 21 years 1 month
Location: Norway

Re: My Latest & Best Titan Texture for Download, NOW

Post #5by rthorvald » 14.03.2005, 00:18

t00fri wrote:Just unzip the present titan-march05.zip archive in your 'extras' folder

Beautiful work, again. Thanks!
It is rather fascinating to experience Titan "appearing" gradually, like this... Sort of like fog lifting...

-rthorvald

Don. Edwards
Posts: 1510
Joined: 07.09.2002
Age: 59
With us: 22 years 2 months
Location: Albany, Oregon

Post #6by Don. Edwards » 14.03.2005, 04:39

Well I like and I am going to use it.
Nice work fridger. :wink:

Don. Edwards
I am officially a retired member.
I might answer a PM or a post if its relevant to something.

Ah, never say never!!
Past texture releases, Hmm let me think about it

Thanks for your understanding.

TERRIER
Posts: 717
Joined: 29.04.2003
With us: 21 years 6 months
Location: West Yorkshire, England

Post #7by TERRIER » 14.03.2005, 11:27

Fidger,

Thanks for the updated texture.

I'd like to say that the opportunity for me to use Celestia to see the emerging features on Titan is very much appreciated.
1.6.0:AMDAth1.2GHz 1GbDDR266:Ge6200 256mbDDR250:WinXP-SP3:1280x1024x32FS:v196.21@AA4x:AF16x:IS=HQ:T.Buff=ON Earth16Kdds@15KkmArctic2000AD:FOV1:SPEC L5dds:NORM L5dxt5:CLOUD L5dds:
NIGHT L5dds:MOON L4dds:GALXY ON:MAG 15.2-SAP:TIME 1000x:RP=OGL2:10.3FPS

Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

Post #8by t00fri » 14.03.2005, 19:40

Thanks everybody for your encouragement...

Bye Fridger

Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

Post #9by t00fri » 14.03.2005, 20:33

Bye the way...

If people want to experiment a bit with a nice Titan bump-map, and some specular illumination ...just let me know. I can always upload my 'titan-bump.png' and corresponding *.ssc 'sniplet'.

Although not supported scientifically, Titan looks graphically much more 'dynamical', i.e. simply much better ;-). 3d needs light and shadow!

Bye Fridger

ElChristou
Developer
Posts: 3776
Joined: 04.02.2005
With us: 19 years 9 months

Post #10by ElChristou » 14.03.2005, 20:58

Hey, for sure !!
What kind of question is this ?? :wink:
Image

julesstoop
Posts: 408
Joined: 27.03.2002
With us: 22 years 7 months
Location: Leiden, The Netherlands

Post #11by julesstoop » 14.03.2005, 22:30

Thanks Fridger!

I've actually superimposed the famous mosaic from Huygens descent in your texture. It worked, but the mosaic ended up being about 35 by 35 pixels large...
Still amazing that the amount of detail in the 4k texture even allowed me to do this.
Lapinism matters!
http://settuno.com/

Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

Post #12by t00fri » 14.03.2005, 23:34

julesstoop wrote:Thanks Fridger!

I've actually superimposed the famous mosaic from Huygens
descent in your texture. It worked, but the mosaic ended up
being about 35 by 35 pixels large...
Still amazing that the amount of detail in the 4k texture even
allowed me to do this.


Julesstoop,

thanks for pointing this out. I can confirm the ~35x35 pixel
offset relative to

Image

The best reading at high magnification of the center of the
'red landing circle' gives

Code: Select all

long = -191.944 degrees
lat   = -10.944 degrees


If I correct Jestr's Huygens landing site in Celestia to these
values, I am ending up about 35 pixels too far north and 35
pixels too far west compared to the red circle.


On the other hand, the uncertainty of matching the recently
published close-up of the landing site to the Cyclops group's
base alignment was at best a few pixels. So I conclude, they
must have done some 'tweaking' in their recent official image
releases.

Unlike my previous textures, this time I assumed their
authority as to the alignment...

Bye Fridger

Scorpiove
Posts: 49
Joined: 14.03.2004
With us: 20 years 8 months

hey

Post #13by Scorpiove » 16.03.2005, 06:12

Very nice work, I'm deffinately going to use this texture. Much appreciated!

Avatar
PlutonianEmpire M
Posts: 1374
Joined: 09.09.2004
Age: 40
With us: 20 years 2 months
Location: MinneSNOWta
Contact:

Post #14by PlutonianEmpire » 16.03.2005, 11:37

I eagerly await the day Titan is finally fully mapped, and the final texture map appearing on Celestia--I just LOVE trying "terraforming experiments" on all kinds of worlds... :D :)

I've downloaded it, but I'm gonna need to halve it's pixel size to run on my computer.
Terraformed Pluto: Now with New Horizons maps! :D

NeilF
Posts: 35
Joined: 20.03.2005
With us: 19 years 8 months

Post #15by NeilF » 20.03.2005, 19:56

I've done as you've said, and unzipped it into my celestia/extras/ folder and I do not get the updated image of Titan :(

I now have...

extras\
textures\
medres\
titan.png
readme
titan.ssc


I run Celestia and don't get it... Any clue?

I'm a novice to this...

Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

Post #16by t00fri » 20.03.2005, 20:21

NeilF wrote:I've done as you've said, and unzipped it into my celestia/extras/ folder and I do not get the updated image of Titan :(

I now have...

extras\
textures\
medres\
titan.png
readme
titan.ssc


I run Celestia and don't get it... Any clue?

I'm a novice to this...


Now since you are a novice, let me ask you a stupid question back:

Perhaps it all worked and you did not notice? What do you see when going to Titan? Did you push the 'I'-key in order to get rid of the yellow haze??

Where is actually the 'titan' directory that was at the top of my archive? You certainly did more than just unzipping my archive in 'extras' as I said in the instructions...

Bye Fridger
Last edited by t00fri on 20.03.2005, 20:25, edited 1 time in total.

Avatar
selden
Developer
Posts: 10192
Joined: 04.09.2002
With us: 22 years 2 months
Location: NY, USA

Post #17by selden » 20.03.2005, 20:22

It looks like you told unZip to restore the files all into the same directory (folder) rather than letting it restore the folders nested inside one another as they're stored within the Zip file.

They should be

Celestia\extras\titan.ssc
so titan.ssc is inside extras,

and

Celestia\extras\textures\medres\titan.png
so titan.png is inside medres is inside textures is inside extras.
Selden

essee
Posts: 24
Joined: 30.12.2004
With us: 19 years 10 months
Location: CO, USA

Post #18by essee » 20.03.2005, 20:23

Try Celestia/extras/addons/titan
Create a folder called titan in which the titan.ssc and readme files reside along with the textures folder. Inside the textures folder place the medres folder. Inside the medres folder place the titan.png. Place this new titan folder into extras/addons and it should work perfect. Yet another beautiful addon from a most creative author...
essee
System- Pentium4 2.4GHz, 1GB RAM,
RaptorHD 74GB 10,000RPM 8MB Cache,
GeForceFX5900XT_GS1100 128MB DDR,
(NVIDIA Forceware71.84,DirectX 9.0c)
SoundBlasterAudigy2ZS,
WinXP_SP2 HomeEdition

DaveMc
Posts: 79
Joined: 09.08.2003
With us: 21 years 3 months
Location: Woodinville, WA, USA

Post #19by DaveMc » 20.03.2005, 22:34

Fridger's new Titan texture is soo good (thanks Fridger!) why even mess with making it an addon? Just put the texture in the Celestia\textures\medres folder, edit the solarsys.ssc file, and have it be the default Titan. Or add it as an alternate texture. My graphics card isn't the best (ATI Radoen VE 7000, 64 MB RAM) so this way also means one less addon to bog things down.

Just my $.02
Dave

Avatar
Topic author
t00fri
Developer
Posts: 8772
Joined: 29.03.2002
Age: 22
With us: 22 years 7 months
Location: Hamburg, Germany

Post #20by t00fri » 21.03.2005, 00:49

DaveMc wrote:Fridger's new Titan texture is soo good (thanks Fridger!) why even mess with making it an addon? Just put the texture in the Celestia\textures\medres folder, edit the solarsys.ssc file, and have it be the default Titan. Or add it as an alternate texture. My graphics card isn't the best (ATI Radoen VE 7000, 64 MB RAM) so this way also means one less addon to bog things down.

Just my $.02
Dave


This version will replace my previous one of the Celestia 1.3.2 distribution in the forthcoming Celestia 1.4.0. However, by default, we usually reduce the textures in size, in order not to make the official archive too 'heavy'. So it will again be a 1k reduction of the present 4k texture.

I was convinced by forum users to pack my 4k Titan texture as an add-on, since -- so people argued-- Newbies can most easily install it this way!

Apparently this was NOT the case in ONE exception above ;-) .

Bye Fridger
Last edited by t00fri on 21.03.2005, 17:02, edited 1 time in total.


Return to “Celestia Users”