Celestia Forums

Posted: **08.06.2010, 16:56**

Hi guys,

just wanted to compile Celestia on Fedora 11 and rann into an error. And being the programming noob that I am, I don't really understand, what make is throwing here at me.

The svn checkout is a totally fresh directory from just 5 minutes ago
CSpice was downloaded from here ftp://naif.jpl.nasa.gov/pub/naif/toolkit//C/PC_Linux_GCC_32bit/packages/ and imported as described.

I ran configure with

Code: Select all

./configure --with-gnome --with-cspice-dir=/usr/local/cspice

then came "make" and that threw the following at me:

Code: Select all

Front-End: Gnome
Use Cairo: yes
Use Lua: yes
Use Theora: yes

[celestia]$ make
make  all-recursive
make[1]: Entering directory `/home/trunk/celestia'
Making all in src
make[2]: Entering directory `/home//trunk/celestia/src'
g++ -c -pipe -O2 -Wall -W -D_REENTRANT -DGLEW_STATIC -DUSE_SPICE -DEIGEN_NO_DEBUG -DEIGEN_NO_DEBUG -DNDEBUG -DNO_DEBUG -DCELX -DLUA_VER=0x050100 -DQT_NO_DEBUG -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/local/Trolltech/qt/mkspecs/linux-g++ -I. -I/usr/local/Trolltech/qt/include/QtCore -I/usr/local/Trolltech/qt/include/QtGui -I/usr/local/Trolltech/qt/include/QtOpenGL -I/usr/local/Trolltech/qt/include/QtXml -I/usr/local/Trolltech/qt/include -I.. -I../.. -I. -I../thirdparty/glew/include -I../thirdparty/Eigen -I../thirdparty/curveplot/include -I/usr/local/cspice/include -I/usr/X11R6/include -I. -Icelestia/qt/ui -o modelfile.o celmodel/modelfile.cpp
In file included from /usr/lib/gcc/i586-redhat-linux/4.4.1/../../../../include/c++/4.4.1/cstdio:46,
                 from celmodel/modelfile.cpp:18:
/usr/include/stdio.h:367: Fehler: Deklaration von »int snprintf(char*, size_t, const char*, ...) throw ()« wirft andere Ausnahmen
../config.h:264: Fehler: von vorheriger Deklaration »int snprintf(char*, size_t, const char*, ...)«
/usr/include/stdio.h:371: Fehler: Deklaration von »int vsnprintf(char*, size_t, const char*, char*) throw ()« wirft andere Ausnahmen
../config.h:260: Fehler: von vorheriger Deklaration »int vsnprintf(char*, size_t, const char*, char*)«
make[2]: *** [modelfile.o] Fehler 1
make[2]: Leaving directory `/home//trunk/celestia/src'
make[1]: *** [all-recursive] Fehler 1
make[1]: Leaving directory `/home//trunk/celestia'
make: *** [all] Fehler 2

Can someone help me out and tell me where the error lies and what I can do to get around it?

Regards,

Guckytos

BTW: I was able to compile Celestia 1.6.1 (without spice) on the same machine without problems some days ago.

Posted: **08.06.2010, 17:44**

Christian,

I really don't understand what you are doing (cf our previous, extensive email correspondence...).

As another check, I downloaded precisely that cspice package from your above link, installed it in /usr/local, deleted all the previous celestia object files, reconfigured and built the latest SVN code.

RESULT:
+++++++++++++++++++++++
NO problems whatsoever!
+++++++++++++++++++++++

I even did TWO independent test compilations:

1) KDE:
======
./configure --prefix=/usr/local --with-kde --with-lua --with-cspice-dir=/usr/local/cspice CXXFLAGS="-I /opt/kde3/include"

2) GNOME:
=========
./configure --prefix=/usr/local --with-gnome --with-lua --with-cspice-dir=/usr/local/cspice CXXFLAGS="-I /opt/kde3/include"

However, there are some things that struck my eye in your above compiler output:

I have a suspicion that somewhere you are using a mix of library versions and|or an incorrect ./configure step!? That multi-repeated error concerning your vsnprintf() declaration reinforces my suspicion...

For instance, why do I see all these Qt directory assignments in your above output. They have no reason to be there in a pure GNOME compile.

Here is an example for the compilation of spiceorbit.cpp in my installation
++++++++++++++++++++++++++++++++++++++++++++++++++++++

g++ -DHAVE_CONFIG_H -I. -I../.. -I.. -I../../thirdparty/Eigen -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -I /opt/kde3/include -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -I/usr/local/cspice/include -DUSE_SPICE -O2 -Wall -ffast-math -fexpensive-optimizations -fomit-frame-pointer -DORBIT2=1 -pthread -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-keyring-1 -I/usr/include/libgnome-2.0 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/gail-1.0 -I/usr/include/freetype2 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libpng12 -I/usr/include/gtkglext-1.0 -I/usr/lib/gtkglext-1.0/include -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -DLUA_VER=0x050100 -DCELX -MT spiceorbit.o -MD -MP -MF .deps/spiceorbit.Tpo -c -o spiceorbit.o spiceorbit.cpp
++++++++++++++++++++++++++++++++++++++++++++++++++++

No Qt-stuff whatsoever. I suspect, for some reason you still have a Qt configuration set up by qmake and incorrectly use the respective, generated Makefiles for your gnome compile...

Moreover, I am surprised why I see the g++ compiler referring to a RedHat subdirectory despite your German compiler output?

/usr/lib/gcc/i586-redhat-linux/4.4.1/

Did you install such crucial components from different Linux distributions??

Fridger

Posted: **08.06.2010, 18:01**

t00fri wrote:Christian,

I really don't understand what you are doing (cf our previous, extensive email correspondence...).

As another check, I downloaded precisely that cspice package from your above link, installed it in /usr/local, deleted all the previous celestia object files, reconfigured and built the latest SVN code.

RESULT:
+++++++++++++++++++++++
NO problems whatsoever!
+++++++++++++++++++++++

I even did TWO independent test compilations:

1) KDE:
======
./configure --prefix=/usr/local --with-kde --with-lua --with-cspice-dir=/usr/local/cspice CXXFLAGS="-I /opt/kde3/include"

2) GNOME:
=========
./configure --prefix=/usr/local --with-gnome --with-lua --with-cspice-dir=/usr/local/cspice CXXFLAGS="-I /opt/kde3/include"

No Qt-stuff whatsoever. I suspect, for some reason you still have a Qt configuration set up by qmake and incorrectly use the respective, generated Makefiles for your gnome compile...

Moreover, I am surprised why I see the g++ compiler referring to a RedHat subdirectory despite your German compiler output?

/usr/lib/gcc/i586-redhat-linux/4.4.1/

Did you install such crucial components from different Linux distributions??

Fridger

Well, seems like I still don't totally understand what I am doing too :oops:

Your suspicion was right on the spot. For some reason a Qt configuration was still used by qmake as it seems.

Just killed the trunk directory reloaded the svn, used your configure line and presto, everthing compiled alright. I just feel like sinking through to the center of the earth :oops:

And nope, I did not mix any compilers from different Linux distributions, I don't even know enough Linux to know how to do it.

Regards and Thanks,

Guckytos

Posted: **08.06.2010, 18:05**

Congratulations... so our long private correspondence finds it's happy end at last...

Fridger

Posted: **10.06.2010, 07:42**

--- edit ---

Celestia Forums

Trouble compilig Celestia on Linux, help needed

Trouble compilig Celestia on Linux, help needed

Re: Trouble compilig Celestia on Linux, help needed

Re: Trouble compilig Celestia on Linux, help needed

Re: Trouble compilig Celestia on Linux, help needed

Re: Trouble compilig Celestia on Linux, help needed